This amp is practically just like a JL 500/1. Does not come with any of the accessories, just the amp itself. It is in great condition cosmetically, and Functionality. I would say 9.5/10 cos, and 10/10 function.
As seen on ebay here:
http://search.ebay.com/search/search.dll?sofocus=so&sbrftog=1&dfsp=1&catref=C6&from=R40&satitle=bpx500.1&sacat=-1%26catref%3DC6&a14=-24&a31300=-24&a10244=-24&alist=a14%2Ca31300%2Ca10244%2Ca3801&pfmode=1&reqtype=1&gcs=1548&pfid=1906&pf_query=bpx500.1&sargn=-1%26saslc%3D2&sadis=200&fpos=20891&sabfmts=1&saobfmts=insif&ftrt=1&ftrv=1&saprclo=&saprchi=&fsop=1%26fsoo%3D2
Im asking for $200 shipped. Pics upon request, just send me a PM. I have enough refs on this forum. See below.
High-Efficiency Switching Power Supply
Current Servo Circuitry with Crown Technology
"Direct Connect" Terminal Block Allows for 4 or 8 Gauge Power Wire
Series or Parallel Bridge for Full Power Into 4-Ohm or 1-Ohm Loads
Die-Cast Aluminum Chassis with Top Plexiglas Viewing Window
Variable Low-Pass Crossover (32-320 Hz)
Selectable Crossover Slope (12 / 24 dB)
Dynamic Bass Optimization (DBO) Subsonic Filter
Preamp Outputs
Remote Level Control Included
Fully CEA-2006 Compliant Power Ratings
Amplifier Type: Mono
RMS Power: 718W x 1 @ 4 Ohms
THD at 4-Ohm RMS Power: 0.5 %
RMS Power: 674W x 1 @ 1 Ohm
Speaker Level Inputs: No
Preamp Outputs: Yes
Built-In Crossovers: LP
Bass Boost: None
Frequency Response: 25.4-340 Hz
Signal to Noise Ratio: 66.4 dB
This amp is 4 ohm, and 2 ohm stable with the same power!... Its like a better version of the Alpine PDX's
//content.invisioncic.com/y282845/emoticons/cool.gif.3bcaf8f141236c00f8044d07150e34f7.gif
As seen on ebay here:
http://search.ebay.com/search/search.dll?sofocus=so&sbrftog=1&dfsp=1&catref=C6&from=R40&satitle=bpx500.1&sacat=-1%26catref%3DC6&a14=-24&a31300=-24&a10244=-24&alist=a14%2Ca31300%2Ca10244%2Ca3801&pfmode=1&reqtype=1&gcs=1548&pfid=1906&pf_query=bpx500.1&sargn=-1%26saslc%3D2&sadis=200&fpos=20891&sabfmts=1&saobfmts=insif&ftrt=1&ftrv=1&saprclo=&saprchi=&fsop=1%26fsoo%3D2
Im asking for $200 shipped. Pics upon request, just send me a PM. I have enough refs on this forum. See below.
High-Efficiency Switching Power Supply
Current Servo Circuitry with Crown Technology
"Direct Connect" Terminal Block Allows for 4 or 8 Gauge Power Wire
Series or Parallel Bridge for Full Power Into 4-Ohm or 1-Ohm Loads
Die-Cast Aluminum Chassis with Top Plexiglas Viewing Window
Variable Low-Pass Crossover (32-320 Hz)
Selectable Crossover Slope (12 / 24 dB)
Dynamic Bass Optimization (DBO) Subsonic Filter
Preamp Outputs
Remote Level Control Included
Fully CEA-2006 Compliant Power Ratings
Amplifier Type: Mono
RMS Power: 718W x 1 @ 4 Ohms
THD at 4-Ohm RMS Power: 0.5 %
RMS Power: 674W x 1 @ 1 Ohm
Speaker Level Inputs: No
Preamp Outputs: Yes
Built-In Crossovers: LP
Bass Boost: None
Frequency Response: 25.4-340 Hz
Signal to Noise Ratio: 66.4 dB
This amp is 4 ohm, and 2 ohm stable with the same power!... Its like a better version of the Alpine PDX's
//content.invisioncic.com/y282845/emoticons/cool.gif.3bcaf8f141236c00f8044d07150e34f7.gif
