No pics of the accident, I took a turn to get onto the highway too quickly, lost control, hit the median and then 4x4ed right over it to the other side. Selling anything I can to raise funds. All prices include shipping and paypal fees. Please PM me if you are interested in anything.
Sennheiser RS-110 headphones. I use them maybe once a week, they're about six months old.
$50
Dayton Audio 15" home subwoofer: BNIB
The Dayton Reference Series subwoofers take the quality and performance of the much acclaimed RS line into the subwoofer realm. As with the rest of the Reference Series, the main focus of these subwoofers is ultra-low-distortion. Second, third, and intemodulation distortion are kept extremely low by utilizing three short-circuit paths within the motor structure. A durable aramid fiber spider and extensive venting throughout provide quiet and uniform excursion. The black anodized cone, rubber surround, and custom basket give this driver a unique, high-end look. Choose the high fidelity version for home systems when you are looking for clean, low bass and are not restricted by cabinet size.
Specifications: *Power handling: 500 watts RMS/800 watts max *VCdia: 2-1/2" *Le: 1.00 mH *Impedance: 4 ohms *Re: 3.3 ohms *Frequency range: 18 - 800 Hz *Fs: 18 Hz *Magnet weight: 150 oz. *SPL: 90 dB 2.83 V/1m *Vas: 9.55 cu. ft. *Qms: 3.10 *Qes: .49 *Qts: .42 *Xmax: 14mm *Dimensions: A: 15-5/16", B: 14-1/8", C: 6-1/8".
$125
Bash 500watt plate amp: BNIB
BASH patented amplifier technology was developed to offer extreme amounts of power without the wasted heat and energy of traditional amplifier designs. Add to this an intelligent circuit design, and you get benefits such as extremely low distortion and high signal to noise ratios. The combination of clean output and high power makes the BASH amplifiers some of the best sounding subwoofer amplifiers on the market. Features: 50 to 150 Hz low-pass crossover, 0 degree or 180 degree phase, line level inputs, speaker level inputs, line outputs, master on/off switch, auto on
Specifications: 500 watts RMS @ .5%THD into 4 ohm load. Signal to noise ratio 105 dB A-weighted, Dimensions: 12" W x 8" H x 3-1/2" D.
* High power output in a compact, lightweight design
* Speaker and line level inputs for connection to any stereo
* Limiting circuit prevents audible clipping and protects woofers
* Auto On/Off and phase reversal switch
$175
If you pick up the plate amp and dayton subwoofer together I'll throw in two precision ports.
Diamond Audio D6 subwoofers *dual 4* (I have two of them and like to sell as a pair.
* Power Handling NOM/MAX: 1000 watts MAX, 500 watts RMS
* Sensitivity (2.83V/1m): 84 dB SPL
* Freq. Response: 23-250
* Type: Dual voice coil
* Size: 10 in.
* Mounting Depth/Diameter: 5.6 in. / 9.2 in.
* Alloy Driver and Ferrite Magnet
$175 (for the pair)
The box obviously I'd like to see go as well. The dimensions are 40" x 16" x 13 1/2". It's 2.5 cbft after displacement tuned to 32hz.
$125
my ebay reference: randyproch
Sennheiser RS-110 headphones. I use them maybe once a week, they're about six months old.
$50
Dayton Audio 15" home subwoofer: BNIB
The Dayton Reference Series subwoofers take the quality and performance of the much acclaimed RS line into the subwoofer realm. As with the rest of the Reference Series, the main focus of these subwoofers is ultra-low-distortion. Second, third, and intemodulation distortion are kept extremely low by utilizing three short-circuit paths within the motor structure. A durable aramid fiber spider and extensive venting throughout provide quiet and uniform excursion. The black anodized cone, rubber surround, and custom basket give this driver a unique, high-end look. Choose the high fidelity version for home systems when you are looking for clean, low bass and are not restricted by cabinet size.
Specifications: *Power handling: 500 watts RMS/800 watts max *VCdia: 2-1/2" *Le: 1.00 mH *Impedance: 4 ohms *Re: 3.3 ohms *Frequency range: 18 - 800 Hz *Fs: 18 Hz *Magnet weight: 150 oz. *SPL: 90 dB 2.83 V/1m *Vas: 9.55 cu. ft. *Qms: 3.10 *Qes: .49 *Qts: .42 *Xmax: 14mm *Dimensions: A: 15-5/16", B: 14-1/8", C: 6-1/8".
$125
Bash 500watt plate amp: BNIB
BASH patented amplifier technology was developed to offer extreme amounts of power without the wasted heat and energy of traditional amplifier designs. Add to this an intelligent circuit design, and you get benefits such as extremely low distortion and high signal to noise ratios. The combination of clean output and high power makes the BASH amplifiers some of the best sounding subwoofer amplifiers on the market. Features: 50 to 150 Hz low-pass crossover, 0 degree or 180 degree phase, line level inputs, speaker level inputs, line outputs, master on/off switch, auto on
Specifications: 500 watts RMS @ .5%THD into 4 ohm load. Signal to noise ratio 105 dB A-weighted, Dimensions: 12" W x 8" H x 3-1/2" D.
* High power output in a compact, lightweight design
* Speaker and line level inputs for connection to any stereo
* Limiting circuit prevents audible clipping and protects woofers
* Auto On/Off and phase reversal switch
$175
If you pick up the plate amp and dayton subwoofer together I'll throw in two precision ports.
Diamond Audio D6 subwoofers *dual 4* (I have two of them and like to sell as a pair.
* Power Handling NOM/MAX: 1000 watts MAX, 500 watts RMS
* Sensitivity (2.83V/1m): 84 dB SPL
* Freq. Response: 23-250
* Type: Dual voice coil
* Size: 10 in.
* Mounting Depth/Diameter: 5.6 in. / 9.2 in.
* Alloy Driver and Ferrite Magnet
$175 (for the pair)
The box obviously I'd like to see go as well. The dimensions are 40" x 16" x 13 1/2". It's 2.5 cbft after displacement tuned to 32hz.
$125
my ebay reference: randyproch
