Dmac1991
'12 Focus Bangin
Item(s) for Sale:
DC Audio Level 3 15" D2
Item(s) Description/Condition:
Only has about 3 hours of playtime total. Just installed it day before Thanksgiving. Still a brand new sub **** near minus the plastic wrap. Will come in factory packaging. Just looking to upgrade to something that will take a bit more power.
9.5/10 cosmetically since it has been mounted and used for ~3 hours
10/10 mechanically
Had it in a 3.25cf box powered by a CT Sounds 900.1. Never got even remotely warm. Upgrading to the CT 1400.1 soon and doubt the sub would like roughly double it's RMS
Specs
Mounting Depth 8"
Mounting Hole Diameter 14"
Outside Driver Diameter 15.7"
Motor Width 7"
Weight 21.5lbs
VC Diameter 3"
Displacement .18³ ft
Magnet Weight 18lbs
Power Handling RMS/Peak 900/1800
Impedance (Ohm) D1/D2/D4
Sd 823cm²
Vas 84.88 liters
Cms 0.09 mm/N
Mms 295 g
Fs 30.9
BL 17.2 N/A
Re 3.6 Ohm
Le 3.5 mH
Qms 8.18
Qes 0.706
Qts 0.65
Xmax 23 mm
Ref SPL @ 1 watt 87.3 dB (90.8@2.83V)
Suggested Sealed 2³ ft
Suggested Ported 3³ ft
Price:
$250 shipped OBO
will also sell with box if needed. Custom made 3.25cf tuned to 30hz for 160 shipped.
Shipping and Miscellaneous Item Information:
on me
Item Pictures:
(List pictures in this section, 1st picture should be your username/date if you have less than 10 positive feedbacks with the i-Trader system or less than 10 references that you have sold to in the past. (These must be listed in your signature, or a link provided to a feedback thread listing these references)).
link to feedback from eBay: eBay Feedback Profile for meangreen2014
my miniscule iTrader feedback list: MobileAudioForum
DC Audio Level 3 15" D2
Item(s) Description/Condition:
Only has about 3 hours of playtime total. Just installed it day before Thanksgiving. Still a brand new sub **** near minus the plastic wrap. Will come in factory packaging. Just looking to upgrade to something that will take a bit more power.
9.5/10 cosmetically since it has been mounted and used for ~3 hours
10/10 mechanically
Had it in a 3.25cf box powered by a CT Sounds 900.1. Never got even remotely warm. Upgrading to the CT 1400.1 soon and doubt the sub would like roughly double it's RMS
Specs
Mounting Depth 8"
Mounting Hole Diameter 14"
Outside Driver Diameter 15.7"
Motor Width 7"
Weight 21.5lbs
VC Diameter 3"
Displacement .18³ ft
Magnet Weight 18lbs
Power Handling RMS/Peak 900/1800
Impedance (Ohm) D1/D2/D4
Sd 823cm²
Vas 84.88 liters
Cms 0.09 mm/N
Mms 295 g
Fs 30.9
BL 17.2 N/A
Re 3.6 Ohm
Le 3.5 mH
Qms 8.18
Qes 0.706
Qts 0.65
Xmax 23 mm
Ref SPL @ 1 watt 87.3 dB (90.8@2.83V)
Suggested Sealed 2³ ft
Suggested Ported 3³ ft
Price:
$250 shipped OBO
will also sell with box if needed. Custom made 3.25cf tuned to 30hz for 160 shipped.
Shipping and Miscellaneous Item Information:
on me
Item Pictures:
(List pictures in this section, 1st picture should be your username/date if you have less than 10 positive feedbacks with the i-Trader system or less than 10 references that you have sold to in the past. (These must be listed in your signature, or a link provided to a feedback thread listing these references)).
link to feedback from eBay: eBay Feedback Profile for meangreen2014
my miniscule iTrader feedback list: MobileAudioForum