SOLD [FS] BNIB 18" BTL, MA audio 1500 RMS amp, two robot underground 12" hardtimes, wires

crunklech
10+ year member

captain crunch
80
0
VA
I recently just took out my whole system and trying to sell it all for tattoo money, not looking for trades since i already have anything i need... unless you can tattoo for car audio equipment then we could work out something. It is all in perfect working order and was never abused. I can do paypal or personal checks. The prices are not shipped, shipping is determined by how many items you buy and how far away you live. I can also do pick up or meet you somewhere reasonably. *LOWERED PRICES ON EVERYTHING*

1) I have a brand new 18" BTL still in the original shipping crate with the FI postcard. It is fully loaded with D2 configuration and the daily option, Its also got the newer FHC motor design as well. looking for $375

DSCF9199.jpg


DSCF9204.jpg


DSCF9202.jpg


2) MA audio SY7011DX monoblock amplifier; i bought this used in october and used it to power my two twelves. It works great and has normal wear and tear marks on it. It has a digital screen on it which displays temp, volts, etc. It has 0g terminals which is always nice. It comes with a very sturdy bass knob made out of metal. I had it running at 1 ohm daily with no problems ever, never went into protection once the entire time i had it. Here are the factory specs on it: RMS Power @ 14.4V 4 Ohm 750W, 2 Ohm 1000W, 1 Ohm 1500W. Signal to Noise Ratio >96dB. THD Level 4 Ohm 0.5%, 2 Ohm 0.5%, 1 Ohm 1.0%. Frequency Response 10Hz - 350Hz. 24dB Low Pass Filter 50Hz - 350Hz. 24dB Subsonic Filter 15Hz - 50Hz. Bass Boost Control at 45Hz. 0 - 18dB. RCA Input Sensitivity 0.2 - 8V. Low level Input Impedance 22K Ohms. Damping Factor 200 @ 4 Ohm. Fuse Rating 40A x 4 Dimensions. (W x H x L) 11.6 x 2.56 x 16.73. looking for $150

CA001-1.jpg


CA002-1.jpg


3) two Robot Underground 12" hardtimes; i bought these new in october and these subs are awesome. Superior build quality just like you would expect from patrick at RU. these are d4 configuration so you can wire both of them together to achieve a 1 ohm load. They are rated at 650 watts RMS a piece. Look up ebay item #220360925451 to look at all the specs. That is for the 10" model because i cant find the 12", but its the same motor and basket. They have never been clipped or abused, and i have never got any funny smells or smoke come out of the box ports. Still in perfect condition and It comes with two free wire grilles. SOLD

CA008-1.jpg


CA009-1.jpg


CA011-1.jpg


CA012-1.jpg


4) wiring; two runs of 4g wire, the red run has a RF fuse holder with 100A fuse in it. I also have two sets of monster 101 XLN RCA cables (only one pictured). They are extra low noise and are twisted/shielded and feature gold contacts. Will throw in a roll of free speaker wire as well if you buy these. Looking for $40

CA006-1.jpg


 
im asking 100 for both not including shipping... so the lowest i would go on one 12" is 55 plus shipping

 
$375 is already $125 less then i paid for it and it is still brand new... lowest i can do is that

 
i got this right before they came out with the new magnets, just never used it because the box would have been nearly impossible for my trunk. this is still the three slug motor... but i was told by nick from fi that is motor was FHC machined though

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

About this thread

crunklech

10+ year member
captain crunch
Thread starter
crunklech
Joined
Location
VA
Start date
Participants
Who Replied
Replies
45
Views
4,021
Last reply date
Last reply from
plasticspoon
20240604_170857.jpg

metalheadjoe

    Jun 5, 2024
  • 0
  • 0
Screenshot_20240605_200209_Adobe Acrobat.jpg

Dylan27

    Jun 5, 2024
  • 0
  • 0

New threads

Top