Ok, time to clear out some stuff because i need the money to buy new things (or pay off debts). So i'm putting my kx2500.1 and TC Sounds LMS-4000 sub up for sale. Not really looking for trades, but it won't hurt to hear offers, worse thing i'll say is no //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif
First up is the kx2500.1. Looking for 525shipped within the 48states.
Specs:
Height:2-1/2 inches / 6.35 centimeters
Width:10-1/8 inches / 25.7 centimeters
Length with EndKaps:30-9/16 inches (77.6cm)
Length without EndKaps:26-5/16 inches (66.8cm)
Frequency Response:20 Hz - 200Hz, +0, -1 dB
Input Sensitivity:170 mV - 5 V low level, 340 mV - 10 V high level
Signal-to-Noise Ratio:>85 dB, a-weighted, re: rated power
Electronic Crossover:Variable low pass, 50 - 200 Hz, 12 dB/octave
KickBass Boost:Variable 0 to +18 dB boost @ 40 Hz
Subsonic Filter:12 dB/octave High Pass @ 25 Hz
@ 14.4Vdc, 4Ω Mono, 1.5% THD+N 1x1500
@ 2Ω Mono, 1.5% THD+N 1x2500
@ 12.5Vdc, 4Ω Mono, 1.5% THD+N 1x1200
@ 2Ω Mono, 1.5% THD+N 1x2000
Condition/Description/Other Information:
There are scratches on the amps and one of the endcap is broken, though not severely. I have pix of all of this and are posted. A bit dirty, but i will clean before shipping it out to the buyer //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif
Here are the pix
This is the biggest scratch on the amp that might be visible, the endcaps might be able to hide it though.
scratches on both sides where the endcaps can hide them //content.invisioncic.com/y282845/emoticons/confused.gif.e820e0216602db4765798ac39d28caa9.gif
broken endcap, but u can't really tell
with endcaps
Up next is the LMS-4000, has a dent on the cone, not too big and will not affect performance. This is brand new, i have never hooked this up. Looking for 450+shipping.
Specs can be found here http://www.tcsounds.com/lms4000.htm
Dent on the cone
Butt shot
First up is the kx2500.1. Looking for 525shipped within the 48states.
Specs:
Height:2-1/2 inches / 6.35 centimeters
Width:10-1/8 inches / 25.7 centimeters
Length with EndKaps:30-9/16 inches (77.6cm)
Length without EndKaps:26-5/16 inches (66.8cm)
Frequency Response:20 Hz - 200Hz, +0, -1 dB
Input Sensitivity:170 mV - 5 V low level, 340 mV - 10 V high level
Signal-to-Noise Ratio:>85 dB, a-weighted, re: rated power
Electronic Crossover:Variable low pass, 50 - 200 Hz, 12 dB/octave
KickBass Boost:Variable 0 to +18 dB boost @ 40 Hz
Subsonic Filter:12 dB/octave High Pass @ 25 Hz
@ 14.4Vdc, 4Ω Mono, 1.5% THD+N 1x1500
@ 2Ω Mono, 1.5% THD+N 1x2500
@ 12.5Vdc, 4Ω Mono, 1.5% THD+N 1x1200
@ 2Ω Mono, 1.5% THD+N 1x2000
Condition/Description/Other Information:
There are scratches on the amps and one of the endcap is broken, though not severely. I have pix of all of this and are posted. A bit dirty, but i will clean before shipping it out to the buyer //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif
Here are the pix
This is the biggest scratch on the amp that might be visible, the endcaps might be able to hide it though.
scratches on both sides where the endcaps can hide them //content.invisioncic.com/y282845/emoticons/confused.gif.e820e0216602db4765798ac39d28caa9.gif
broken endcap, but u can't really tell
with endcaps
Up next is the LMS-4000, has a dent on the cone, not too big and will not affect performance. This is brand new, i have never hooked this up. Looking for 450+shipping.
Specs can be found here http://www.tcsounds.com/lms4000.htm
Dent on the cone
Butt shot
