So.. im lookin to try some new subs.. im leaning towards a SI Mag or SI Bm so these have got to go. There is absolutely nothing wrong with these and they are both amazing drivers.
The TC-3000 has less than 10 hours of use on it. Its been getting about 1100-1200w RMS from my MD2 @ 1.5ohms. Only time i pushed it real hard was when i used it for bassrace and even then i only pushed it hard for less than a minute. It is in very good condition. It is truly a great sub! I'm sure it could get much much louder in a better box. I had it in a 1cuft with 2 PR's. I'm sure it would much better and louder in a regular slot ported box.
Next up I have a TC Sounds IS-101. This sub sounded REALLY clean with a good amount of output off of 600w from my MD2, it could probably get much louder in a better box and more power, I had it in a .6cuft sealed. The bad thing about this sub is that it is SVC4ohm. TC Sounds recommends you use PR's with this sub but I never got the chance to try it but I'm sure it would be an awesome set up. This sub only has about an hour of use on it. It is still stiff as f*ck and probably still needs a break in. Kyle @ TC sounds says the T/S parameters are identical to the OEM's so I it if you need them.
SOLD!!
Last I have 2 PR's with the honeycomb cone. Used them with the TC-3000 so they have less then 10 hours of use also. Never understood how to use these but they do help a lot with low end extention. i already cut the bolt thing so it isn't so long. All the weights and nuts will be included. I can fit 8 weights + the nut comfortably on each PR which is 100g per weight and 170g for the nut.
Prices:
TC-3k - $280 shipped
IS-101 - SOLD!!
PR's - $70 shipped each.
And I do have the original boxes and packaging for all of these
Trades: Mainly lookin for a sundown amps, SI mags or SI bms 10's and 12's only. Nothing bigger. I'm probably open to other offers just post em up. but im pretty firm on Sundownz for amps. Or maybe a 5-ch memphis .
EDIT: All of these are 10"!
The TC-3000 has less than 10 hours of use on it. Its been getting about 1100-1200w RMS from my MD2 @ 1.5ohms. Only time i pushed it real hard was when i used it for bassrace and even then i only pushed it hard for less than a minute. It is in very good condition. It is truly a great sub! I'm sure it could get much much louder in a better box. I had it in a 1cuft with 2 PR's. I'm sure it would much better and louder in a regular slot ported box.
Next up I have a TC Sounds IS-101. This sub sounded REALLY clean with a good amount of output off of 600w from my MD2, it could probably get much louder in a better box and more power, I had it in a .6cuft sealed. The bad thing about this sub is that it is SVC4ohm. TC Sounds recommends you use PR's with this sub but I never got the chance to try it but I'm sure it would be an awesome set up. This sub only has about an hour of use on it. It is still stiff as f*ck and probably still needs a break in. Kyle @ TC sounds says the T/S parameters are identical to the OEM's so I it if you need them.
SOLD!!
Last I have 2 PR's with the honeycomb cone. Used them with the TC-3000 so they have less then 10 hours of use also. Never understood how to use these but they do help a lot with low end extention. i already cut the bolt thing so it isn't so long. All the weights and nuts will be included. I can fit 8 weights + the nut comfortably on each PR which is 100g per weight and 170g for the nut.
Prices:
TC-3k - $280 shipped
IS-101 - SOLD!!
PR's - $70 shipped each.
And I do have the original boxes and packaging for all of these
Trades: Mainly lookin for a sundown amps, SI mags or SI bms 10's and 12's only. Nothing bigger. I'm probably open to other offers just post em up. but im pretty firm on Sundownz for amps. Or maybe a 5-ch memphis .
EDIT: All of these are 10"!
