Frosted plexiglass?

//content.invisioncic.com/y282845/emoticons/search.gif.e79a63b2b580b39b282dff402646b704.gif
crazycj4.png


 
My installer did this with his Toureg... What he did was across the whole back trunk area he made a glowing VW symbol.... He made the cutout design out of a piece of plexi, and then a cutout with a piece of 1/4" MDF..... Sanded and shaped the top piece, then spray painted it black with a nice shiny coat on top....put the plexi in the back...but DID NOT cut out the VW symbol (which appeared to be between the 2 back seats right between the 2 headrests) and that is where he had the LED's...in the back of the plexi...so when you looked at it from the back of the car...you saw the black piece on top, then the lighted plexi behind it...its was pretty cool.

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

About this thread

phantom240

5,000+ posts
ALL YOUR INTERNETZ
Thread starter
phantom240
Joined
Location
Southeast Louisiana
Start date
Participants
Who Replied
Replies
9
Views
890
Last reply date
Last reply from
snb778
IMG_1882.jpeg

slater

    Oct 4, 2025
  • 0
  • 0
Screenshot_20251004_120904_Photo Translator.jpg

1aespinoza

    Oct 4, 2025
  • 0
  • 0

New threads

Top