Frequency Chaning???

[kush-divinity 10+ year member]

I always left it about 4-5" wide..and it filled in the rest which changed with every box..i just modified the length to get high 29-low 30hz

Oh if u mean on my current box..its a roung port i forget was like around 2 inches at 4" diameter..tuned to either 32 or 34 i forget.

Although this was hard to read and comprehend, am I reading right, you have a 4" port 2 inches long?

Hmmm, interesting concept.

 

[Rashaddd 5,000+ posts]

oh boy..

 

[badvlvo 10+ year member]

I'm a noob to frequency tuning but I understand the failure here.

 

[kfx450r 10+ year member]

Thanks for the absolutly pointless posts.

The port is a pvc 4" diameter about 2" deep into the box.

 

[kfx450r 10+ year member]

If someone could help me with this box itd be appreciated..instead of pointless criticism posts. For now the box will be for 2x new style type Rs..ported..I made a design in re's calculator.. width50xheight18xdepth15 wood thickness .75 square port height 16.5 port width 4", length 1 10.25, length 2 16", total port lngth 33". square port area is 66, box volume is 4.98 before sub displacements, tuning frequency is 29.98. I was aiming for 30hz but i guess with the subs it raises it? IS there anything wrong with this box.

 

[Xprime4 10+ year member]

Thanks for the absolutly pointless posts.
The port is a pvc 4" diameter about 2" deep into the box.

//content.invisioncic.com/y282845/emoticons/rolleyes.gif.c1fef805e9d1464d377451cd5bc18bfb.gif that's not a port, that's an hole

 

[Xprime4 10+ year member]

by the way do you got pics? i'll sign you up in a failure contest