Sold --/|\..: FOR SALE: Zapco Amp ::../|\--

[adirevolvo 10+ year member]

Rated at >1024x1 at 4ohms rms

Really puts out a 1200x1 at 4ohms rms

Peak at about 1600x1 at 4ohms

250x2 at 4ohms

450x2 at 2ohms

keep in mind this is zapco power, so it is all VERY clean and very low distortion.

The amp is in 100% working condition and looks about 95%. Has some very light scratches on the sides but nothing major. give me your e-mail for pictures

This is the top of the line zapco refrence amp. Was made 11.8.02 so its about 1 year old.

Make an offer, maybe open to trades for a lesser quality amp that can run at 1 ohm over 1k watts plus cash.

Thanks -Aaron

Bangnvolvo@hotmail.com

Feedback can be seen on sounddomain.com in the feedback forum, under wrongwd on ebay, or I can give you aim's of people who I have delt with.

Click to read more...

 

[onlyphases 10+ year member]

is it bridgeable into 2ohm???

 

[Stinky1]

The specs he wrote say 1024x1 - Thats bridged .. LOL.. If you have (4) 4 ohm woofers - that would be 450x2 - 2 4 ohm woofers bridged would get approx 550 watts each

 

[Mixophrenia 10+ year member]

The specs he wrote say 1024x1 - Thats bridged .. LOL.. If you have (4) 4 ohm woofers - that would be 450x2 - 2 4 ohm woofers bridged would get approx 550 watts each

1024 is bridged into 4 ohms... he wants to know if it's bridged into 2 ohms... there's a difference...

 

[oryan20xx 10+ year member]

1024 is bridged into 4 ohms... he wants to know if it's bridged into 2 ohms... there's a difference...

Anything is possible depending on the speakers so yes, its bridgable to 2 ohms

 

[adirevolvo 10+ year member]

ummmm....nooooo

IT CAN NOT RUN MONO AT ANYTHING UNDER 4OHMS.

 

[playa1 10+ year member]

Zapco is quality stuff....it probably can be run that low.

 

[adirevolvo 10+ year member]

Zapco is quality stuff....it probably can be run that low.

well yes it can, but its not happy when under 4ohms. its rated at 4ohms, not 2 or 1. Anyone who knows zapco, arc, tru, etc knows that most of these higher end amps are like that...

 

[onlyphases 10+ year member]

well yes it can, but its not happy when under 4ohms. its rated at 4ohms, not 2 or 1. Anyone who knows zapco, arc, tru, etc knows that most of these higher end amps are like that...

thank you for letting me know.

i dont believe i can use this then to run two e12a subs w/o pushing the amp optimally

 

[bumpin_blazer 5,000+ posts]

take it from someone who has ran zapco ref. amps at 2ohm mono for ohhhhh going on 9 months day and night now. trust me she'll take 2ohm mono day night for as long as you want her to. do they recommend it no, will it handle it yes.

adam

 

[BooLeaN 10+ year member]

I am running a Zapco AG350 at 1.3 ohms stereo, so that's the same as 2.67 ohms mono. I run it for hours and hours at a time, no problems at all. I used to run it at 2.67 mono on 3 12W0's and it was fine there as well.

Great products, my favourite amp so far that I've owned.

 

[adirevolvo 10+ year member]

yeah true, but i dont want someone to get it and blow it cuz they run it too low, bump

 

[BooLeaN 10+ year member]

Ya, it's totally up to whoever buys it to take the risk. All I'm saying is that Zapco makes some amazing amps. I'm fully satisfied with mine.

Good luck

 

[adirevolvo 10+ year member]

ttt ttt ttt

 

[bumpin_blazer 5,000+ posts]

i'll bump it again and add that i was incorrect in my thought. my buddy is running his ref 1000@1ohm mono day and night for the past 9 months. only thing that changes is obviously power output, and amp pull.

adam