Fitting 24's

[MA$E 10+ year member]

anyone know a good way to fit 24's on a buick lesabre. Im tryin to able to ride 4 deep and not have to worry about rubbin or scrapping. any insight will be helpful

Click to read more...

 

[crunktimes.com 5,000+ posts]

first

 

[99gtxgolfer 10+ year member]

nuh i want 24's!

 

[J31Rob 5,000+ posts]

Cut, cut & more cutting.

You can either lift to compensate the rims, or you can cut away & build a new wheel well to compensate them.

 

[SethPhillips 5,000+ posts]

lift it. cause you get 4 fat ni**a's in there and ur fu*ked.. my buddy sliced up the white wall's on his whip rideing too deep

 

[crunktimes.com 5,000+ posts]

Yeah you get some deerhunt size hoes you are gonna need to lift that shit.

 

[MA$E 10+ year member]

i know i need to lift it. any info on how i can do it myself?

 

[J31Rob 5,000+ posts]

The more I post here, the more I realize how hard it is for people to just post a simple answer..

It's almost as if people have replaced knowledge with sarcasm.. & ignorance.

 

[SethPhillips 5,000+ posts]

The more I post here, the more I realize how hard it is for people to just post a simple answer..
It's almost as if people have replaced knowledge with sarcasm.. & ignorance.

yea i know what ur sayin.

i have never lifted anything.... i go the opposite way on big wheel's so i dunno ?

 

[donpisto 5,000+ posts]

Quick answer, don't even do 24's. Stick with 22's if you are really interested, but I wouldn't even do that personally.

 

[MA$E 10+ year member]

22's look like 20's on my car.

and i still need to do a lift with 22's

 

[22mountaineer 10+ year member]

I would cut it, wouldnt lift.. I havent personally seen one with the 4's but a friend of mine has one and they just look to big and bulky to lift them for 4's. I could be completely wrong though, just an imagination.

 

[MA$E 10+ year member]

Heres on on 24's ...

and heres on on 22's

 

[ShiningBuick 10+ year member]

To be perfectly honest that top car on 24's doesn't look as bad as I thought it would.

Still, I'd rock the 22's, with the right offset you could probably get away without lifting it.

You coulb always take the money oyu saved by not buying 24's and get airbags and tuck them 22's!!

Otherwise perhaps... spacers between the spring and bearing plate? I'm not really sure, but it'll have to be custom.

 

[MA$E 10+ year member]

i unno i know a spot that does the spacers but i hear u cant ride more then 2 deep in the car. im tryin to be able to ride 4 deep with out the spacers breakin and i dont want the rub either. if i have to cut it i will but i really dont want to.