finally bought....

[fwb_1234 10+ year member]

Or 120......like they are rated?

 

[fwb_1234 10+ year member]

1000hz, but really you should:

Set the gains with a dmm.

Turn them down so that they blend well with the other amps/substage.

You might want to mess with the gains some to hear what clipping sounds like. Set the gains at zero and then build up until the sound goes from a pleasant, constant tone to a flappy, shitty sound.

 

[kross 10+ year member]

Or 120......like they are rated?

They are rated for 250 watts peaks, with 125 watts continuous. As you know, actual, real-world music doesn't output constant power like a sine wave. It has peaks. The ratio of peaks to average power is called crest factor. Most average music has a crest factor from 4:1 to 8:1. This means the average power will be 1/4 to 1/8 the peak power. So you'll have nice 250 watt peaks, while the average, continuous power will be closer to 50 watts.

 

[btdickey99 5,000+ posts]

well i dont really exactly know when the distortion kicks in

then maybe you shouldnt be in car audio

 

[SRim23 5,000+ posts]

just be careful the new momo tweets are pretty touchy. plenty of people on here with momo's looking for new tweets.

*knock on wood* had mine over a year now with 120 rms per side with no problems.

 

[zeed 10+ year member]

Congrats! Hope you enjoy it!

 

[kovemaster559 5,000+ posts]

set the gain on ur amp at half then slowly move up toward

3/4 then 7/8 gain if ur equiptment can handle it

 

[fwb_1234 10+ year member]

set the gain on ur amp at half then slowly move up toward 3/4 then 7/8 gain if ur equiptment can handle it

Hell, turn that shit up all the way. That fuzz sound is just the air moving.

Kovemaster, and anyone else, if you are unsure of something, DON'T POAST.

 

[king ranch 5,000+ posts]

deff not gonna turn in up halfway or more unless it needs it i think i am gonna use a 1khz test tone and set for 100rms and if i need more go up some more i have 1 year warranty so if the tweets go its not biggie

 

[nismos14 5,000+ posts]

Use your ear.

 

[kovemaster559 5,000+ posts]

deff not gonna turn in up halfway or more unless it needs it i think i am gonna use a 1khz test tone and set for 100rms and if i need more go up some more i have 1 year warranty so if the tweets go its not biggie

u should do it hahahahahhhah cmon just tune them to what sounds good u could use the dmm but u dont know how or u chose not to use it but hey good luck if u bought the rf60 i was pming u about i dough u would have trouble blowing them up how can u kill 3 inch coils but i think the polks are ok i guess just tune with dmm

 

[kovemaster559 5,000+ posts]

Hell, turn that shit up all the way. That fuzz sound is just the air moving.
Kovemaster, and anyone else, if you are unsure of something, DON'T POAST.

POAST , TOAST ,COAST, cmon dude i try once in a while get a sence of humor. POST!!!!!!!!!!!!

 

[king ranch 5,000+ posts]

u should do it hahahahahhhah cmon just tune them to what sounds good u could use the dmm but u dont know how or u chose not to use it but hey good luck if u bought the rf60 i was pming u about i dough u would have trouble blowing them up how can u kill 3 inch coils but i think the polks are ok i guess just tune with dmm

dude jsut because i didnt buy your speakers get off my case and you can blow any speaker doesnt matter what it is i am sure its possible

 

[kovemaster559 5,000+ posts]

dude jsut because i didnt buy your speakers get off my case and you can blow any speaker doesnt matter what it is i am sure its possible

3 inch coils FTW tho. the polks are kool they are my one of my last choise but post a review on what sq is like on them

 

[UCF52 10+ year member]

thats what i want to use so i dont have no chance of blowing them

You can still blow your speakers if you set the gains with a DMM //content.invisioncic.com/y282845/emoticons/fyi.gif.9f1f679348da7204ce960cfc74bca8e0.gif