nosaj070
10+ year member
CarAudio.com Veteran
Woodglue, silicon sealant, almost anything will work.
Ive seen a thread like this before and a guy suggested silicone.I guess it all depends on how big the cracks are.
Activity
No one is currently typing a reply...
Similar threads
Bassbox pro requires many t/s parameters some of which arent on the skar audio website. This is my first time searching for t/s parameters online...
- Started by RotkvicaBoi
- Enclosure Design & Construction
Turn up the radio until you hear the cracking then dial it down like 2 notches Set the gain on your amp to that point or get an aftermarket head...
- Started by ElantraGTNoob
- General Car Audio
Have you checked out these shallow drivers from DD? A friend had 4 of them and man, it took it to the house for what they are...
- Started by Kybassbwoy
- Subwoofers
My guess is, once you get the speaker in it, more like 34hz so good to go. With that unit, try it up, try it to the rear, see which works best...
- Started by zoltman1991
- Subwoofers
I’m leaning towards the xv3 tbh. I’m also leaning towards adding the rings or if I can figure out how much taller to raise the top portion of the...
- Started by West1
- Enclosure Design & Construction 2
About this thread
New threads
-
Tapping speaker wire verses T harness for sub amp?Are there any noticeable benefits with going with a T harness...
- Started by qwerty11
- Replies: 0
-
Completely Worthless Rant, Strong Language keep sensitive ears away.I will never buy a modern car. **** your turbo ****, they...
- Started by i2ain2thunder
- Replies: 1
-
No sound on new additionI have an Alpine Aix w650 Bluetooth headset with backup cam...- Started by Scott B.
- Replies: 1
-
Old School BuildI had to remove this old school build a couple of days ago...- Started by Bobbytwonames
- Replies: 0
-
Drilling through carpetWhen I install my amp rack in my Caddy I will need to drill...- Started by maylar
- Replies: 5