FI SSD or Q?

[Orion Man 10+ year member]

Hey guys, I am going with 1 12 for my system. I have a ported enclosure that is 2.67cu-ft @ 35hz.

Wanting to know which Fi Sub will work best in it running off a BD1500.1 RF amp?

Click to read more...

 

[bass_lover1 10+ year member]

either will work in that enclosure. I'd go for the Q solely based on the amp you're using, the Q should handle that extra power a bit better.

 

[Orion Man 10+ year member]

Alright, Q it is.

 

[Qbenjamin 10+ year member]

I hope you will not be pushing 1500w to that sub. I didn't feel like looking up the specs on that amp.

 

[Orion Man 10+ year member]

The owner of Fi told me he runs 1500 into his personal system which is 2 10" Q's. So, I think it will be manageable.

 

[jblayz1 10+ year member]

go with Q

 

[Qbenjamin 10+ year member]

The owner of Fi told me he runs 1500 into his personal system which is 2 10" Q's. So, I think it will be manageable.

2 Q's can handle 2Kw. Again, you are asking for trouble sooner or later running 1500w to a single Q.

 

[goinpro 10+ year member]

Im running around 1500 to my Q, My gains are set low but I know many people that are running 10001bd to there Q's

 

[revrider1 5,000+ posts]

Get 2 SSD's. you can get 2 moving decently with 1500watts

 

[Orion Man 10+ year member]

The owner of Fi told me he runs 1500 into his personal system which is 2 10" Q's. So, I think it will be manageable.

I think he meant 1500 for the pair. My bad. Do you think 1K into 1 Q would sound good? If I go with the heavier duty coils?

 

[Ignatowski 5,000+ posts]

I got 1000 to a Q12,I like it alot - pounds

 

[9512ds 5,000+ posts]

Get the BP option and the power will be fine.

 

[filtor1 10+ year member]

I second the BP option with that power. I have been feeding my pair of 12's a PCA2000D for about 6 months, they eat it up. I don't have any options though.

 

[Orion Man 10+ year member]

Do you guys think my 6002 will run an SSD 12? The birth sheet says bridged its output was 759watts rms?

 

[filtor1 10+ year member]

Do you guys think my 6002 will run an SSD 12? The birth sheet says bridged its output was 759watts rms?

Yes.