fi question

[RKPsk8er 10+ year member]

I have 3.2 cubes total before driver and port displacement

could I run an FI BTL 15" off 2500 rms in that many cubes and sound okay?

should I go with the Mach 5 SPL 15 instead?

or

should I just go with a single 12 in a smaller box since I don't have quite enough for a 15?

also,

does fi have a website?

just kidding.. but seriously.. do they?

Click to read more...

 

[97gp 5,000+ posts]

IDK do they have a website?

 

[jbizzle 5,000+ posts]

Ported box: 3-5cuft | 3-5cuft

So yes..

 

[97gp 5,000+ posts]

I say no after driver displacement your already down to 3, then after your port your box will be way to small.

 

[RKPsk8er 10+ year member]

3 cubes is enough?

 

[boomzilla 10+ year member]

efeyecaraudiodotcom

 

[RKPsk8er 10+ year member]

well I'll be using an aero port which is less displacement.

so should I go with a single 12 in 2.5ish or a single 15 in 3.2 before driver and port displacement?

either will be off my rf t20001bd

 

[RKPsk8er 10+ year member]

???

up

 

[RKPsk8er 10+ year member]

c'monnn. should I go with a single 12 or 15 with 3.2 cubes total before aeroport and driver displacement.

sub choices are: HDC3, MACH 5 SPL, and FI BTL

all powered with 2600 rms (RF T20001bd)

 

[RKPsk8er 10+ year member]

anyone?

 

[SSS 18734 5,000+ posts]

It's within Fi's recommended enclosure size, so I don't see why not.

EDIT: just noticed you have 3.2 cu.ft. total. Step down to a 12"

 

[97gp 5,000+ posts]

I already told you to go with a 12"

 

[jmanpc 5,000+ posts]

http://www.caraudio.fi //content.invisioncic.com/y282845/emoticons/fyi.gif.9f1f679348da7204ce960cfc74bca8e0.gif

And go with a 12.

 

[RKPsk8er 10+ year member]

=[ I really want a 15 to work. gah this *****.

 

[darkhunter139 10+ year member]

I am putting a 15 inch SSD in a ported box with about 3.3 cubes

I think ull be ok but 12 might be better