Fi BL Fully Loaded 12" w/ 4" coil and Custom AV2 12"!!!

Beerdrnkr
5,000+ posts

CarAudio.com Veteran
Rating: 100%
5 0 0
Item(s) for Sale:

12" Fully loaded Fi BL w/ 4" coil. Great sounding sub.

Custom Av2 Underhung Driver + Ti Basket + CF Cone + Copper Coil + TC Spaced Spiders

Item(s) Description/Condition:

Dual 2ohm fully loaded w/ 4" coil. In very good overall condition. There is some rust on the motor as you can see in the pics.

This is the sub Zeuslicious built a while back. Excellent sub and a low end monster!

12" Sub, Underhung Motor Design, Beefy 3" Dual 2ohm RW Copper Coil, Candy Blue Ti Basket w/TC terminals, Dual Spaced TC Soft Spiders with leads sewn in, Rare Carbon Fiber layered Cone with a Nice High Surround similar to the high roll surround and light weight RF Inverted Plastic Cap.

The sub Was Built for daily SQL Application so I'll rate it between 1000 and 1600rms. Daily even more if you know what you're doing.

Price:

$265 shipped.

Zeuslicious wanted $410 local for the AV2. I'll do $350 local or $385 shipped!

I also have a box that I believe is 2.5c/ft birch w/ a pair of side firing aeroports tuned to 32-33hz. If you're interested in the box let me know and I'll give you a local price for it with or without one of the subs.

Trades welcomed but specifically looking for the following:

JL Audio XD600/6, SA8v.2's, 2500-3000wrms amp, processors (bit-one, Rockford 3sixty.3, etc.), or smaller footprint batteries. I can add cash as well as having a few other things for trade.

Shipping and Miscellaneous Item Information:

Item Pictures:

(List pictures in this section, 1st picture should be your username/date if you have less than 10 positive feedbacks with the i-Trader system or less than 10 references that you have sold to in the past. (These must be listed in your signature, or a link provided to a feedback thread listing these references)).

DSC00969.jpg


DSC00971.jpg


DSC00972.jpg


DSC00973.jpg


DSC00974.jpg


DSC00979.jpg


DSC00978.jpg




Untitled by Beerdrnkr, on Flickr



Untitled by Beerdrnkr, on Flickr



Untitled by Beerdrnkr, on Flickr

 
Last edited by a moderator:
when did fi come out with a 4" coil bl series woofer?
It's a custom option.

Can you pm me dimensions on that box and best you can do for that av.2 and box shipped to 96003? Any interests in a partial trade for a 10 inch alpine type x? Still looks minty has mounting gasket and all.
This is what I was given for the specs on the box and I'll pm you a packaged deal right now: Ok, I have this design together. It's 2.66 cubes of internal airspace tuned to 30 hz. After all displacements (2 3" ports), subs' displacement and bracing displacements, we'll be right. 2.2 cubes. 2 3" aero ports will fire to the side.

Dimensions are 12.75" high, 38" wide, and 13.5" deep. LMK how that'll fit and if that works for you! I may need to do a small amount of adjusting on the dimensions to get your tuning up to 32 hz if you really need it there.

 

---------- Post added at 06:21 PM ---------- Previous post was at 06:21 PM ----------

 

when did fi come out with a 4" coil bl series woofer?
It's a custom option.

Can you pm me dimensions on that box and best you can do for that av.2 and box shipped to 96003? Any interests in a partial trade for a 10 inch alpine type x? Still looks minty has mounting gasket and all.
This is what I was given for the specs on the box and I'll pm you a packaged deal right now: Ok, I have this design together. It's 2.66 cubes of internal airspace tuned to 30 hz. After all displacements (2 3" ports), subs' displacement and bracing displacements, we'll be right. 2.2 cubes. 2 3" aero ports will fire to the side.

Dimensions are 12.75" high, 38" wide, and 13.5" deep. LMK how that'll fit and if that works for you! I may need to do a small amount of adjusting on the dimensions to get your tuning up to 32 hz if you really need it there.

 
Mounting depth on the av2?
and what is the RMS?

Never bought anything off of here before, I am assuming payment is via PayPal?

Thanks,

Brian
I don't have the mounting depth off hand but it's 1500wrms and yes it is via paypal. Let me know if you have any other questions. I'll pull out the sub tomorrow and get the dimensions for you. Thanks

 
Thank you.

Mounting depth will help.

Had a box made for an old school stroker, but she got stolen and would like to use the box for this application. How much space is *ideal* for this sub? Box is at 2.5 with out considering sub displacement.

 
AV2 has been sold!

Thank you.
Mounting depth will help.

Had a box made for an old school stroker, but she got stolen and would like to use the box for this application. How much space is *ideal* for this sub? Box is at 2.5 with out considering sub displacement.
Sorry, someone ended up sending me the funds for the AV2 last night and I had to go with whoever first contacted me to be fair. However, the Fi is still for sale. It's also a great sounding sub, the mounting depth is less, it'll easily handle 1500wrms, and it's less expensive. Let me know if you're interested in the Fi. Thanks

 
I just did something that I haven't done in years. While swapping the av2 out with the BL so I could ship it, I punctured the surround on the BL. Still sounds great but I don't have any ca glue to patch it up at the moment. So because of this I'll do $210 shipped on the BL! I'll have a picture up in a few.



Untitled by Beerdrnkr, on Flickr

 
Last edited by a moderator:
how was the bl subjected to rust enabling enviroment?
Not sure. I did a trade plus cash for some 8w7's I had and the rust was never mentioned to me.

It's been a great sub though. I'm currently running it off an American Bass PH4000 and it sounds really good. I don't think it can really be beat for the price I'm selling it at considering shipping will easily be $60 or so.

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

About this thread

Beerdrnkr

5,000+ posts
CarAudio.com Veteran
Thread starter
Beerdrnkr
Joined
Location
San Diego
Start date
Participants
Who Replied
Replies
34
Views
4,466
Last reply date
Last reply from
tc300
IMG_20260516_193114554_HDR.jpg

sherbanater

    May 16, 2026
  • 0
  • 0
IMG_20260516_192955471_HDR.jpg

sherbanater

    May 16, 2026
  • 0
  • 0

New threads

Top