Fi BL 15" (RIPPED TINSEL LEADS, ASSUME ONLY MOTOR)

JoeK
10+ year member

CarAudio.com Elite
Rating: 100%
2 0 0
Item(s) for Sale:

Fi BL 15" no options with one set of broken tinsel leads, other side repaired.

Item(s) Description/Condition:

Like i said, both sides had tinsel rip and ive only been able to repair one side. Other side i tried 5 times and failed, so i gave up. If you could fix it, then good for you.

Coil has black lines in it but looks pretty good overall.

ASSUME YOU ARE ONLY GETTING A MOTOR. I dont want to hear that it was coming unwound or was clipped to death after you get it. If it works, consider this is a steal, if it doesnt you have been told. I cant see a problem other than the tinsel leads, but it started sounding pretty weird at high notes.

I want to stress that i do not guarantee the coil at all, if it fails i dont want to hear it later on..

Price:

$100+real shipping

Shipping and Miscellaneous Item Information:

Have original box and wood frames it came in. Shipping reflects shipping price rounded up to the nearest dollar to keep sanity

Item Pictures:

I'll include a few on here and you can go to the link to see the rest..

ENTIRE DIRECTORY LINK: PHPDL - PHP Directory Lister

IMAG0071.jpg


IMAG0065.jpg


IMAG0066.jpg


The side i fixed....

IMAG0067.jpg


Coil shot, you can see a little of the black lines...

IMAG0069.jpg


(List pictures in this section, 1st picture should be your username/date if you have less than 10 positive feedbacks with the i-Trader system or less than 10 references that you have sold to in the past. (These must be listed in your signature, or a link provided to a feedback thread listing these references)).

 
I got a box waiting to be built and an Fi waiting for somebody! If you are good at reconing then you got a STEAL here

If you come and get it local, ill throw in a cheap 15" box @ 5 cubes 25hz as well. Just need it gone

 
Last edited by a moderator:
What possible damage? either way there is always a possibility especially with an even larger package. I'll take the motor only right now if you want to do it. It's not hard to disassemble cut the cone/spiders out then use something like this Impact Screwdriver Set with Case to take the screws out.. and ship it to me Lol.. you could sell the basket for 15-20$ and make more money...
I have cut out the cone and waiting for my neighbor to remove the basket. Still interested? $110 shipped for motor only

 

---------- Post added at 03:18 PM ---------- Previous post was at 03:18 PM ----------

 

$110 shipped for MOTOR ONLY.

Removed the soft parts and it turns out the coil is/was in perfect condition. No unwinding, no black marks or signs of bottoming out. It was perfect! I cried a little after i saw it

 
damnit....wish i saw thie earlier before you cut it. I knew the coil was going to be fine.Those leads typically snap from over excursion, not heat. Pop off the dustcap and solder some new tensile to the coil leads, and reglue or replace the dustcap and bam like new.

o well. just a motor now //content.invisioncic.com/y282845/emoticons/frown.gif.a3531fa0534503350665a1e957861287.gif

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

About this thread

JoeK

10+ year member
CarAudio.com Elite
Thread starter
JoeK
Joined
Location
Ringtown, PA
Start date
Participants
Who Replied
Replies
25
Views
2,719
Last reply date
Last reply from
Dcaudio19
IMG_1882.jpeg

slater

    Oct 4, 2025
  • 0
  • 0
Screenshot_20251004_120904_Photo Translator.jpg

1aespinoza

    Oct 4, 2025
  • 0
  • 0

New threads

Top