few questions about JL 12w6v2

[triplea351 10+ year member]

up

 

[slvrado28z 10+ year member]

You should look into the incriminator audio flatlyne series. ..they are made for sq and get loud

 

[Why So Cereal? 5,000+ posts]

Not sure about corner loading, but I've run and heard the w6 numerous times, sealed and ported. I think what was meant by Keephopealive's statement was that you should be sure whether you go ported, or sealed to build the box according to the subs specs or have a box builder here on the forum design it for you.

 

[slvrado28z 10+ year member]

i just built a box for 2 w6s 12s...i did 5 cu ft tuned to 32-33...and it is clear and gets pretty loud, so i would say 2.5 before displacement and tune to 30-33.

 

[destined2race 10+ year member]

Ya Jl makes some good woofers, just hunt for the best deal possible. Eclipse(TC Sounds) also makes great sounding subs that can get loud. Im runing a 6210 12" i got off ebay new for $110 and its very clean and runin 3cu ported it gets pretty loud for what it is. Go ported, you can get good sound out of it if its designed/built right... and get louder than sealed usually.

 

[triplea351 10+ year member]

btw, the trunk in my car is completely isolated from the cabin.. if that affects the best enclosure

 

[slvrado28z 10+ year member]

what kind of car?

 

[triplea351 10+ year member]

what kind of car?

bmw 3 series coupe

there's corner loading:

and there's this:

Rear Deck Pass-through - E90Fanatics

and finally, this:

Sub install through Ski Boot - BMW 3-Series (E90 E92) Forum - E90Post.com

what would work best?

 

[THATpurpleKUSH 5,000+ posts]

Well at least the battery is in the trunk so you wont have to worry about running the power wire for the amp. I have a buddy with an 02 328i and we have been trying to come up with a simple design. The best we could come up with was finding a backseat that folded down and swapping it in then punching out the sheetmetal barrier between the cabin and trunk. The metal there is stamped and looks like it was meant to be removed.

 

[triplea351 10+ year member]

Well at least the battery is in the trunk so you wont have to worry about running the power wire for the amp. I have a buddy with an 02 328i and we have been trying to come up with a simple design. The best we could come up with was finding a backseat that folded down and swapping it in then punching out the sheetmetal barrier between the cabin and trunk. The metal there is stamped and looks like it was meant to be removed.

my backseats can already be folded down

 

[nauc 10+ year member]

get an RE SE and seal it. you wont hear the difference between it and the 12w6v2 and its $100 cheaper

here..12" Subwoofers

 

[triplea351 10+ year member]

ok, thanks but it's too late i have the sub and the amp i would just like to know how to solve the sound deadening problem between the trunk and the cabin in my car

 

[triplea351 10+ year member]

bump