Few pics of my Volvo...

[bigbangtheory 5,000+ posts]

Looks good, but if you had an installer at a shop do that, then kinda tacky if you ask me. You paid for it, should have looked better IMHO.

I could have done that much and I am not even that good at installing.

Does look like some decent stuff though.

 

[NeedDirections 10+ year member]

I didn't pay an installer to do anything but run RCA's and upgrade my alternator charging wires. He was a super nice guy and offered to help get everything wired in (had wires from previous systems) so i could jam on the drive home and not have to worry about doing it in the rain that night.

BTW the installer in question is Neill Barber...here is his truck:

 

[orangecounty1 10+ year member]

BTW the installer in question is Neill Barber...here is his truck:

remove yourself from his nuts please.

lol jk, dont take offense //content.invisioncic.com/y282845/emoticons/laugh.gif.48439b2acf2cfca21620f01e7f77d1e4.gif

 

[Tehgregzor 10+ year member]

I like it man. I'm sure once you get those subs down to 1ohm you'll love it EVEN more!

 

[NeedDirections 10+ year member]

remove yourself from his nuts please.
lol jk, dont take offense //content.invisioncic.com/y282845/emoticons/laugh.gif.48439b2acf2cfca21620f01e7f77d1e4.gif

1) buy the welder

2) ***** please

 

[orangecounty1 10+ year member]

1) buy the welder
2) ***** please

what good is a welder going to do me

 

[NeedDirections 10+ year member]

Robins car, your car, explorer.....anything you might want to weld, since you have a welder.

 

[orangecounty1 10+ year member]

i cant weld.. lol

plus i have access to way bigger welders, but i still dont know how to weld lol

 

[NeedDirections 10+ year member]

Something new to mess with...thinking 3 cubes tuned to 32 hz, 50 sq inches of port.

old picture of the car:

 

[orangecounty1 10+ year member]

dont put ur macbook so close to the magnet... nice sub tho

 

[NeedDirections 10+ year member]

Random stuff going in...my room is a mess

 

[ls2poweredgoat 5,000+ posts]

fap fap fap fap fap

 

[mobeious 10+ year member]

nice equipment... i had a buddy get a install done at neils shop and i can say if neil does it i dont think u have anything to be worried about but some other guy at his shop did my friends install and totaly screwed his car up.. i wish i had pictures but i think neil took care of my friend and made it right........ anyhow my buddy bought all the equipment from neil and asking him to build a box and panel off the trunk and dynamat the trunk and rear deck...well equipment was 2 TSS 10's and 2 Hifonics Thors (3000x1) each .. the installer ended up not using the Kinetik he bought and ran 4awg from the battery then to the amps and put the amps on top of the box with no vetilation and but another amp in the tirewell ( where it overheated and roasted) then dynamated over all the factory clip holes and just broke all the pins off the factory panels and (set) them in place and the port was crooked on the box. lol but all in all i think neil gave him the install fee back and appologized.... just make sure neil is working on the car and u should be fine

 

[orangecounty1 10+ year member]

nice equipment... i had a buddy get a install done at neils shop and i can say if neil does it i dont think u have anything to be worried about but my some other guy at his shop did my friends install and totaly screwed his car up.. i wish i had pictures but i think neil took car of my friend and made it right........ anyhow my buddy bought all the equipment from neil and asking him to build a box and panel off the trunk and dynamat the trunk and rear deck...well equipment was 2 TSS 10's and 2 Hifonics Thors (3000x1) each .. the installer ended up not using the Kinetik he bought and ran 4awg from the battery then to the amps and put the amps on top of the box with no vetilation and but another amp in the tirewell ( where it overheated and roasted) then dynamated over all the factory clip holes and just broke all the pins off the factory panels and (set) them in place and the port was crooked on the box. lol but all in all i think neil gave him the install fee back and appologized.... just make sure neil is working on the car and u should be fine

wow hahahhahaha

 

[NeedDirections 10+ year member]

nice equipment... i had a buddy get a install done at neils shop and i can say if neil does it i dont think u have anything to be worried about but some other guy at his shop did my friends install and totaly screwed his car up.. i wish i had pictures but i think neil took care of my friend and made it right........ anyhow my buddy bought all the equipment from neil and asking him to build a box and panel off the trunk and dynamat the trunk and rear deck...well equipment was 2 TSS 10's and 2 Hifonics Thors (3000x1) each .. the installer ended up not using the Kinetik he bought and ran 4awg from the battery then to the amps and put the amps on top of the box with no vetilation and but another amp in the tirewell ( where it overheated and roasted) then dynamated over all the factory clip holes and just broke all the pins off the factory panels and (set) them in place and the port was crooked on the box. lol but all in all i think neil gave him the install fee back and appologized.... just make sure neil is working on the car and u should be fine

//content.invisioncic.com/y282845/emoticons/wow.gif.23d729408e9177caa2a0ed6a2ba6588e.gif

Wow...that's shitty. I didn't deal with anyone but neil the entire time. He was very upfront about everything, and called me if there was anything out of the ordinary. I have dealt with plenty of shops over the years and this was the best experience I've had. Granted I didn't get anything close to what your buddy did, that's rough.