Fat Mat

[Below20hzonly 10+ year member]

how much sq ft do you think i need to cover my whole trunk and 2 doors, just an estimate. dont wanna really spend money on 126sq ft of this stuff

Click to read more...

 

[Ge_off_me 5,000+ posts]

I would suggest Audiotechnix, better product and you will need less of it to be effective.

 

[Below20hzonly 10+ year member]

ok man thanks will check it out for sure

 

[Ge_off_me 5,000+ posts]

No problem sir.

 

[sacsking916 5,000+ posts]

At>fatmat all day errday.

 

[zako 10+ year member]

A couple of doors should need around 12 sq ft. Possibly more if you have a large truck or SUV.

 

[TaylorFade 10+ year member]

I did ~ 75% coverage on my innner and outer skin of my doors and most of my trunk with 25sq ft. It goes further than you think.

Two different vehicles, same 25sq ft roll of 80mil AudtioTechnix.

Both doors like this. You can't really see the outer door skin coverage though.

Rear deck (upside down pic) and I ran out of that roll on the trunk lid.

 

[keep_hope_alive Premium Member]

BXT II by Rammaudio is also very good. 20sf per door works well.

 

[murph 10+ year member]

50 sq ft should be ok 75 would be best if your doing more than just the trunk lid and below the rear deck with the 2 doors.

 

[brynm 10+ year member]

I did ~ 75% coverage on my innner and outer skin of my doors and most of my trunk with 25sq ft. It goes further than you think.
Two different vehicles, same 25sq ft roll of 80mil AudtioTechnix.

Both doors like this. You can't really see the outer door skin coverage though.

Rear deck (upside down pic) and I ran out of that roll on the trunk lid.

Why didn't you seal up the holes in the door?

 

[TaylorFade 10+ year member]

Why didn't you seal up the holes in the door?

My midbass was in small sealed (pictured) so sealing wasn't super necessary. I was planning on coming back with some MLV for road noise, but I sold the truck.

 

[brynm 10+ year member]

Ok, couldn't tell from pic.

 

[audiobaun 5,000+ posts]

how much sq ft do you think i need to cover my whole trunk and 2 doors, just an estimate. dont wanna really spend money on 126sq ft of this stuff

One roll for 50ft will be enough more than likely,I used for my doors, flooring in my xcab, and have enough to do my roof possibly

 

[Below20hzonly 10+ year member]

ok thanks, appreciate the help