Fans w/ tstat?

[jdawg 5,000+ posts]

just put the powers together for the fans, ground the fans with the amps, same spot as the relays

 

[jdawg 5,000+ posts]

yea one relay will turn on like 50 amplifiers and 45 fans

 

[Flipx99 5,000+ posts]

Very good...I might use 4 or 6 fans now that I can.

 

[bikinpunk 10+ year member]

I'd suggest you consider fusing them, then. I don't have mine fused, but I probably should.

 

[Flipx99 5,000+ posts]

each one or the line off the relay?

 

[bikinpunk 10+ year member]

I've seen that each one should be fused. The site suggested before shows that they should be fused. Technically, you should always fuse, but in a case like this, nothing bad will probably happen. However, you're putting all your eggs in the "probably" basket.

 

[Flipx99 5,000+ posts]

I've seen that each one should be fused. The site suggested before shows that they should be fused. Technically, you should always fuse, but in a case like this, nothing bad will probably happen. However, you're putting all your eggs in the "probably" basket.

I'd just use small 5A inline fuses that look like butt connectors.