40.00 shipped
this is a g&s competition150 ...it doesnt power up.....nothing is burnt on the board, it hasnt been repaired before....
this amp was made by precision power and is simular to a ppi2075m except without the speaker plug that is nearly impossible to find....very underrated ..
SPECS :
2 x 75w rms at 4 ohm (12V)
2 x 150w rms at 2 ohm (12V)
1 x 300w rms at 4 ohm bridge (12V)
60.00 shipped
I have a old school mtx terminator 250 that needs to be repaired, it doesnt power up....nothing is burnt on the board. its not missing parts looks like to have never been repaired before....
should be a easy fix , i just dont have the time or money to have it worked on
it was made by precision power, and it has a board simular to a ppi promos50 . its a high current low impedance amplifier....
SPECS :
Output Power at 12.5V:
2 x 50W @ 4 ohms (0.02% THD)
2 x 100W @ 2 ohms
2 x 200W @ 1 ohm
2 x 400W @ ½ ohm
1 x 200W @ 4 ohms bridged
1 x 400W @ 2 ohms bridged
1 x 800W @ 1 ohm bridge
this is a g&s competition150 ...it doesnt power up.....nothing is burnt on the board, it hasnt been repaired before....
this amp was made by precision power and is simular to a ppi2075m except without the speaker plug that is nearly impossible to find....very underrated ..
SPECS :
2 x 75w rms at 4 ohm (12V)
2 x 150w rms at 2 ohm (12V)
1 x 300w rms at 4 ohm bridge (12V)
60.00 shipped
I have a old school mtx terminator 250 that needs to be repaired, it doesnt power up....nothing is burnt on the board. its not missing parts looks like to have never been repaired before....
should be a easy fix , i just dont have the time or money to have it worked on
it was made by precision power, and it has a board simular to a ppi promos50 . its a high current low impedance amplifier....
SPECS :
Output Power at 12.5V:
2 x 50W @ 4 ohms (0.02% THD)
2 x 100W @ 2 ohms
2 x 200W @ 1 ohm
2 x 400W @ ½ ohm
1 x 200W @ 4 ohms bridged
1 x 400W @ 2 ohms bridged
1 x 800W @ 1 ohm bridge
