Sold F/S - Lightning Audio Storm X2 Neo (TC Sounds 3HP / 3K)

[massiveaudiocw 10+ year member]

1. Product:

Lighting Audio Storm X2 Neo Motor

2. Specs:

Neo version of the TC 3HP / 3K. Will bolt to up to Lighting Audio Storm X2 and TC Sounds TC-3000 top assomblies. You can also contact Dave aka TeamPSI about a recone kit and basket.

3. Description/Condition:

Good comsetic condition

4. Price:

$220 Shipped via USPS Priority (price is pretty firm, dont realy want to sell but could use $$$)

5. Pictures:

Click to read more...

 

[mobeious 10+ year member]

i dont think david has any baskets for this motor

 

[massiveaudiocw 10+ year member]

i dont think david has any baskets for this motor

Sure he does //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif. He can use any basket, just need to drill and tap the motor for the new bolt pattern.

 

[massiveaudiocw 10+ year member]

i dont think david has any baskets for this motor

Here are the LA Neo's Dave is building for my buddy of mine using DD baskets.

 

[kingkongjr 10+ year member]

d amn sexy...glws

 

[massiveaudiocw 10+ year member]

Think this is already pending sale

 

[orangelss 10+ year member]

If it falls through I'm next in line.

 

[todj 10+ year member]

SS Camaro in the background......nice!

 

[HawaiianBassHed 10+ year member]

it does NOT need to be taped and drilled, just make some custom rings... Scott made mine at least 1/4" steel taped and drilled and straight thru holes that go into the four holes...

distant shot to see the side of the one ring installed and the other sitting in the sub gasket next to it...

top shot of the 6 basket bolts bolted to the ring

view from the side bolt going into the motor to hold the ring down...

or if u can't u can go ahead and tap the motor... I think David has access to a machine shop so imo it would be safer to do the ring imo.

 

[massiveaudiocw 10+ year member]

it does NOT need to be taped and drilled, just make some custom rings... Scott made mine at least 1/4" steel taped and drilled and straight thru holes that go into the four holes...
distant shot to see the side of the one ring installed and the other sitting in the sub gasket next to it...

top shot of the 6 basket bolts bolted to the ring

view from the side bolt going into the motor to hold the ring down...

or if u can't u can go ahead and tap the motor... I think David has access to a machine shop so imo it would be safer to do the ring imo.

Or you could just get a set of QCA rings, but IMHO I would just drill and tap the motor. Anyways its pending sale to SPY.

 

[massiveaudiocw 10+ year member]

Sold