130.00 firm shipped to the cont usa......
that covers paypal fees, shipping cost , bubble wrap, box, and insurance.......it is boxed already, and ready to be dropped off at the ups store...
f.y.i. - this amp has had the power supply rebuilt by me with more robust, higher amp/voltage power supply transistors, new gate drivers, new gate resistors, new 949tl pwm ic chip. and a led light for the top ....
from a scale from 1 to 10...i would give the amp a 7.5 for condition...it has a few scuffs and scratched. but i has all of its original speaker/power terminal screws!
functionality . it is a 10 out of a 10...it works 100%
it has been load tested for a couple hours hooked up to my 12's. they begged for mercy..//content.invisioncic.com/y282845/emoticons/laugh.gif.48439b2acf2cfca21620f01e7f77d1e4.gif , it is ready to pound your subs to...i would not sell it if it didnt work right...
the amp is very underrated.....a guy just posted on here that at 1 ohms , it put out almost 1400 watts....i believe it...its a very solid amp for anybody needing alot of bass.....make sure your speakers can take it...
specs:
1 x 600W @ 4 ohms
1 x 1200W @ 2 ohms or 1 ohm
S/N Ratio: >90dB
Freq. Response: 10Hz ∼ 320Hz
THD+N: 0.1%
Max. Current Draw: 114A
Fuse: 3 x 40A
http://ampguts.realmofexcursion.com/JBL_BP1200.1/
pic of the amp in the dark powered up and working.....the red light comes from under the polished aluminum jbl logo....... looks kinda alien ...lol
yep....how would you like having these eyes looking at you through your window????????//content.invisioncic.com/y282845/emoticons/wow.gif.23d729408e9177caa2a0ed6a2ba6588e.gif
This amplifier has been tested on the bench to operate normally but there is NO FURTHER WARRANTY IMPLIED OR EXPRESSED beyond that this amp will work 100% when you receive it....
that covers paypal fees, shipping cost , bubble wrap, box, and insurance.......it is boxed already, and ready to be dropped off at the ups store...
f.y.i. - this amp has had the power supply rebuilt by me with more robust, higher amp/voltage power supply transistors, new gate drivers, new gate resistors, new 949tl pwm ic chip. and a led light for the top ....
from a scale from 1 to 10...i would give the amp a 7.5 for condition...it has a few scuffs and scratched. but i has all of its original speaker/power terminal screws!
functionality . it is a 10 out of a 10...it works 100%
it has been load tested for a couple hours hooked up to my 12's. they begged for mercy..//content.invisioncic.com/y282845/emoticons/laugh.gif.48439b2acf2cfca21620f01e7f77d1e4.gif , it is ready to pound your subs to...i would not sell it if it didnt work right...
the amp is very underrated.....a guy just posted on here that at 1 ohms , it put out almost 1400 watts....i believe it...its a very solid amp for anybody needing alot of bass.....make sure your speakers can take it...
specs:
1 x 600W @ 4 ohms
1 x 1200W @ 2 ohms or 1 ohm
S/N Ratio: >90dB
Freq. Response: 10Hz ∼ 320Hz
THD+N: 0.1%
Max. Current Draw: 114A
Fuse: 3 x 40A
http://ampguts.realmofexcursion.com/JBL_BP1200.1/
pic of the amp in the dark powered up and working.....the red light comes from under the polished aluminum jbl logo....... looks kinda alien ...lol
yep....how would you like having these eyes looking at you through your window????????//content.invisioncic.com/y282845/emoticons/wow.gif.23d729408e9177caa2a0ed6a2ba6588e.gif
This amplifier has been tested on the bench to operate normally but there is NO FURTHER WARRANTY IMPLIED OR EXPRESSED beyond that this amp will work 100% when you receive it....
