enough port area?

[kyleorsini 10+ year member]

would 3-3"x7.6" be enough port area for a 4.5~cube box tuned to 38 i got the numbers from the psp calc and just need to know if thats going to be enough area or not id be flaring both ends.

Click to read more...

 

[Louisiana_CRX 5,000+ posts]

i prefer slots

 

[mazdakid 5,000+ posts]

No its not enough port area. Thats less area than 2 4" aeros and even thats not enough for 4.5 cubes, imo.

 

[SomeGuyDude 10+ year member]

PVC tube ports are almost impossible to get right anyway, not to mention the hell of securing them. Just make a slot with a nice big opening, it'll go faster.

 

[skmfkr 5,000+ posts]

your gonna need 4 4"

 

[FOSGATE JOE 10+ year member]

2 4'' 4cuft worked good for my 2 12''rf t1s but yeah slote will give you more port area and if done right zero port noise..

 

[kyleorsini 10+ year member]

yeah ill just do a slot just gonna go try and figure out my port dimensions i need to get this box done finally

 

[snb778 5,000+ posts]

PVC tube ports are almost impossible to get right anyway, not to mention the hell of securing them. Just make a slot with a nice big opening, it'll go faster.

unless you don't know what you're doing.....

i've never had much of a problem... plus changing tuning is a matter of 10 min. if you want to change