Enclosure size for 10" W6v2??

[XaznKewLguyX 10+ year member]

anyone ever play with these subs before? I've had a 12 and liked it so I just went and picked up a pair of 10's.. Only plan to use one though.

JL recommends .625 sealed for it, minus displacement would be .557?

That seems a bit small for me.. Anyone try the recommended enclosure yet? I was thinking more like .8-.9 cu.

Click to read more...

 

[GAM3OVR 5,000+ posts]

winisd

For completely flat response, qtc of 0.700 = 0.96 cubes

qtc of 0.725 = 0.85 cubes

qtc of 0.750 = 0.76 cubes

qtc of 0.775 = 0.68 cubes

qtc of 0.800 = 0.62 cubes

(btw jl audio doesnt put in displacement, so the recommended is .625+ sub) which gives you about .79 qtc

The enclosure I did was right around .75 cubes + sub. Worked splendid

 

[XaznKewLguyX 10+ year member]

winisd
For completely flat response, qtc of 0.700 = 0.96 cubes

qtc of 0.725 = 0.85 cubes

qtc of 0.750 = 0.76 cubes

qtc of 0.775 = 0.68 cubes

qtc of 0.800 = 0.62 cubes

(btw jl audio doesnt put in displacement, so the recommended is .625+ sub) which gives you about .79 qtc

The enclosure I did was right around .75 cubes + sub. Worked splendid

I may have to try that..so about 8.2cu?

Might be a noob question but I've been out of the hobby for a while.. Should I go bigger if I'm looking for some good low ends?

 

[supermaxx123 10+ year member]

i would try .6 after sub displacement.