Enclosure Design

  • 2
    Participant count
  • Participant list

LarryG
10+ year member

Junior Member
20
0
Iowa
Ok, so I'm ordering an Fi 15Q tomorrow, I just got done designing the box wanted to know peoples thoughts + someone looking over it to make sure I did everything right.

Building a box of 3.2ft^ @ 31hz

box is 15 x 27.1 x 17.5

total port = 21" (20.9)

Sub displacement is .19

port displacement is .15 (.1458)

box after sub+ port 2.86ft^

image of the box design



Uploaded with ImageShack.us

 
That seems like an awfully small amount of port for that box much less for a 15, but I also don't know a lot. Also, you didn't tell us how long the port is.

Maybe less port area works for an SQ based sub like the Q? But still, that isn't even a whole 10^2 per cube.

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

I thought about running two 1 inch dowels, top to bottom and side to port side. I am going to run 2 baffles, so will be 1 1/4" thick front.
4
1K
Could not tell you, but you may want to start by going to crutchfield and get a consensus on the 7 or so replacements they recommend. That average...
1
776
You could try to make the port longer, but there might be other reasons with the box won't extend lower, or even the sub. You'd have to reverse...
3
769

About this thread

LarryG

10+ year member
Junior Member
Thread starter
LarryG
Joined
Location
Iowa
Start date
Participants
Who Replied
Replies
1
Views
1,313
Last reply date
Last reply from
SquishY
Screenshot_20240524_202505_Samsung Internet.jpg

winkychevelle

    May 24, 2024
  • 0
  • 0
Screenshot_20240523-151806.png

1aespinoza

    May 23, 2024
  • 0
  • 0

New threads

Top