Eclipse Ti surround repair help

JayDubb757
10+ year member

CarAudio.com Elite
For the past few days, I've been noticing a popping sound coming from one of my subs. Still bangs hard, and you hardly hear it in the drivers seat.

Did some more investigating today, and I noticed when the bass hits I would get air coming from the cone.

Pressed on the cone, and I can see the surround coming off the cone:crap:

Its come apart from about 12 o'clock to 6 o'clock.

Whats the best adhesive to glue the surround back?

Any tips or techniques that I should follow when doing this?

Should I pull the rest of the surround that's still glued, and glue the whole thing, or just where its needed?

Any help would be appreciated.

Amazon.com: Hot Stuff Special T Instant CA Glue, 2 Ounces: Home Improvement

2mmelqe.jpg


2zeihif.jpg


mawbgg.jpg


30j2vqc.jpg


 
I would use a medium thick ca in VERY SMALL amounts, also I would glue whats come loose before I pulled anymore loose that way you maintain you VC in the center of the gap since you can't shim it.

 
I would use a medium thick ca in VERY SMALL amounts, also I would glue whats come loose before I pulled anymore loose that way you maintain you VC in the center of the gap since you can't shim it.
Any specific brand? Gotta link?

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

About this thread

JayDubb757

10+ year member
CarAudio.com Elite
Thread starter
JayDubb757
Joined
Location
Hampton, VA
Start date
Participants
Who Replied
Replies
10
Views
2,703
Last reply date
Last reply from
JayDubb757
IMG_20260516_193114554_HDR.jpg

sherbanater

    May 16, 2026
  • 0
  • 0
IMG_20260516_192955471_HDR.jpg

sherbanater

    May 16, 2026
  • 0
  • 0

New threads

Top