DVC driver with Voice Coils in Parallel (help!)

[Xesar1988]

Hi i have 2 massive m6 8ohm in rear doors. Can i parellel a speaker by itself or do i have to parellel together to.make them louder at 4ohm? See picture and thanks!

Click to read more...

 

[Louisiana_CRX 5,000+ posts]

Hi i have 2 massive m6 8ohm in rear doors. Can i parellel a speaker by itself or do i have to parellel together to.make them louder at 4ohm? See picture and thanks!

Yes that will work and give you a 4 ohm load

 

[Xesar1988]

So by itself? Or together? Thanks boss!

 

[Louisiana_CRX 5,000+ posts]

So by itself? Or together? Thanks boss!

Each speaker to each channel of the amps ..each dvc 8 wired parallel will give you a 4 ohm load

 

[garychoffmann 10+ year member]

Aren't those mids svc? I have not seen a dvc 8 ohm 6.5

 

[Xesar1988]

Yea are dvc thanks

 

[garychoffmann 10+ year member]

Yea are dvc thanks

What's the model number? Dvc's on a mid could be useful

 

[Xesar1988]

model # just says m6 but come in diffirent specs 4 ohm ect so i dont know . I.am tryin to.upload picture of box for some reason does not allow me too. Here are serial # m617050669

 

[Xesar1988]

It has 2 negatives and 2 positives

 

[BOOMINGRANDPA 5,000+ posts]

model # just says m6 but come in diffirent specs 4 ohm ect so i dont know . I.am tryin to.upload picture of box for some reason does not allow me too. Here are serial # m617050669

click reply, then go advanced, then manage attachments then click browse/up load

 

[kcr357 10+ year member]

Pretty sure it's a single, the 2 sets of hookups are just to ease installation if running both speakers off the same channel. Like when a monoblock has two sets of outputs