Dual 2 Ohm wiring help

threedd97
10+ year member

My Lovely Lady Lumps
I know Dual 2 ohm can go negative > negative to negative on amp and same for the positive to obtain 1ohm stable through the amp (if the amp outputs power @ 1 ohm). Can you wire this any differently to get 4 ohms or 2 ohms or anything? Or am I stuck at 1 ohm as my only choice?

 
I thought so about the 4 ohm. With these amp specs, what kind of power will it see:

4X 75 RMS 4 Ohm @ .04%THD

4 X 150 RMS 2 Ohm

2 X 300 Watts RMS Power (4 Ohm)

It's not my equipment. I sold my D2 XXX to a friend and he has this ghetto multichannel Planet Audio TT4300 amp.

I know whatever this amp will push won't be REMOTELY enough for this sub, it's temporary until the end of the month and I'll have him buy a 1500w @ 1ohm monoblock at the least.

And thanks for the link to the help thread, it helped a lot.

 
the best thing to do with a 4ch amp to one sub is just bridge ch 1 and 2 to get the 300rms at 4 ohm, then wire ur sub up to get the 4 ohms........ dont even mess with ch 3 and 4 unless you got another sub to hook up the same way

 
wiring option

at 2 ohms per coil connect them to channels 3 & 4 in the amplifier. This way you get 300w RMS into the speaker and have 2 free channels to run mids etc

 
that amp wont even move a xxx
I know it won't. I ran a 1500w Cadence ZRS-8 to it in my car, but between the box literally taking up my entire trunk and my rears seats not folding down except for that little middle section ('98 grand prix gt) it sounded like **** compared to what it sounds like in his 4runner on that crappy amp at only 300w. I can't imagine what it will sound like with the proper wattage and a better amp.

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

About this thread

threedd97

10+ year member
My Lovely Lady Lumps
Thread starter
threedd97
Joined
Location
Biloxi, MS
Start date
Participants
Who Replied
Replies
8
Views
766
Last reply date
Last reply from
threedd97
IMG_1882.jpeg

slater

    Oct 4, 2025
  • 0
  • 0
Screenshot_20251004_120904_Photo Translator.jpg

1aespinoza

    Oct 4, 2025
  • 0
  • 0

New threads

Top