spoonraker
10+ year member
CarAudio.com Elite
This is my first time designing a box, I used the tutorial in the sticky
here's what I got
*note : I rounded the depth off so things might be a bit out of whack, but if it's a lot I would like to know
================================================================
internal width : 28.5 in LxH = 456 in^2
internal height : 16 in
internal depth : 18.75 in
external width : 30 in
external height : 17.5 in
external depth : 20.25 in
port width : 3.5 in
port height : 16 in
port area : 56 in^2
port length : 33.25 in
port displacement : 1.31 ft^3
tuning : 33hz
internal NET volume : 3.5 ft^3
internal gross volume : 5 ft^3
subwoofer displacement : .19 ft^3
Cuts :
top/bottom : 30 x 20.25 in (2)
left side : 20.25 x 16 in
right side : 18.75 x 16 in
front : 25.75 x 16 in
back : 29.25 x 16 in
port1 : 15.25 x 16 in
port2 : 13 x 16 in
to better illustrate my cuts, here's a picture of how it should all line up, the boards will be put together as shown
here's what I got
*note : I rounded the depth off so things might be a bit out of whack, but if it's a lot I would like to know
================================================================
internal width : 28.5 in LxH = 456 in^2
internal height : 16 in
internal depth : 18.75 in
external width : 30 in
external height : 17.5 in
external depth : 20.25 in
port width : 3.5 in
port height : 16 in
port area : 56 in^2
port length : 33.25 in
port displacement : 1.31 ft^3
tuning : 33hz
internal NET volume : 3.5 ft^3
internal gross volume : 5 ft^3
subwoofer displacement : .19 ft^3
Cuts :
top/bottom : 30 x 20.25 in (2)
left side : 20.25 x 16 in
right side : 18.75 x 16 in
front : 25.75 x 16 in
back : 29.25 x 16 in
port1 : 15.25 x 16 in
port2 : 13 x 16 in
to better illustrate my cuts, here's a picture of how it should all line up, the boards will be put together as shown
//content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif 
