does any1 know

[brazybrew88 10+ year member]

i have 2 alpine type r subs (srw1242d) and a rockford fosgate 551x amp what would be the best way to go about wiring this setup without taking a chance of messing up the subs or amp

Click to read more...

 

[NewToTheGrounds 10+ year member]

you should be able to bridge 2 channels for each sub and run them at 4ohms , thats the best u'll get.

So put the positive wire from the first sub to the positive of the first channel and the negative from the first sub to the negative of the second channel, than take the second sub and put its positive to the 3channels positive and than take its negative and put it to the negative of the fourth channel.

275 watts RMS x 2 in bridged mode at 4 ohms

its not gunna be very much for those type-r's but if u dont like u can always upgrade ur amp ;P

 

[MSW Danny 10+ year member]

You need to upgrade your amp

 

[BassAce 10+ year member]

You need to get an 800-1000 w rms amplifier at 2 ohms.