distribution blocks

[Humpty 10+ year member]

ok so already have an aftermarket head unit, and a 2000w re audio amp and a 2000w 15" re audio sub. its all wired with 0 gauge. I've recently acquired 4 6.5 kicker component speakers and 350.4 kicker amp. So my question is, is there a distribution block that I could use to tap into the 0 gauge wire and go down to 8 gauge for the 350w amp?

or do I need to run a new wiring kit straight off the battery for the speakers amp?

Click to read more...

 

[winkychevelle 10+ year member]

Prolly cheaper to run a whole new amp kit. Distros can be expensive add in the cost of the rcas and wire and you've easily hit the 40 buck price a new kit woot cost

 

[THChief]

You should be able to use a 2 way fuse block, pretty inexpensive although I do not know if they make 0 to 8 gauge. It might be easier to just run 4 gauge to the kicker amp.

 

[UnderFire 10+ year member]

Any 0 to 4 gauge distro block will work fine, I use 4 gauge sized fuse holders on 8 gauge.

 

[Tenacious]

A distro block would work, but 8 gauge amp kits are really cheap as well.