DD1508 vs. 8W7 Pic.

[GAM3OVR 5,000+ posts]

DD needed more power dood^^

The 600 was more then plenty for daily, especially the way he cranks it

 

[GAM3OVR 5,000+ posts]

Will have a JL 1000/1 V2 on the DD when installed.. the W7 couldn't take the power without bottoming out quickly. The small port and 33hz tune wasn't helping though.

so the enclosure was at fault

 

[snfsh79077 10+ year member]

really? have you used both??
and kudos for taking me 100% seriously //content.invisioncic.com/y282845/emoticons/crazy.gif.c13912c32de98515d3142759a824dae7.gif

no I haven't used both but I have heard both and have talked with people who have used both.

The w7 is made more for sq while getting decently loud. The 1508 is made more for spl while still retaining sq. There is a difference there and for the price the 1508 is always on top in my book...and most others.

and your so very welcome for me taking you serious //content.invisioncic.com/y282845/emoticons/thumbsup.gif.3287b36ca96645a13a43aff531f37f02.gif

With your avatar I was taking you seriously also //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

x2

out perform takes it to which category?
I think overall W7 > DD1508

I believe the DD was getting 600 RMS from an alpine

In a neon

and the W7 was fed by either a 500/1v2 or 600.1 HD block. I really don't recall

In a Wrx 03

my point still stands. In your example two different cars were used and the dd was being under powered. Even though they are rated for less they prefer more.

DD needed more power dood^^

x2

 

[snfsh79077 10+ year member]

The 600 was more then plenty for daily, especially the way he cranks it

in the right box people feed them 1000rms daily.

I have a plan for a build with 3 of them and 4000rms on tap for daily

 

[got-one-eight 10+ year member]

so the enclosure was at fault

Possibly. We will see how the DD performs in the same enclosure with the same port and same tune before I tune it up a little higher.

 

[david in german 10+ year member]

the W7 should perform better sealed...if you could get your hand on a 1008a it would be a close match sealed...I've never tested the 1508t's sealed.....Ported the 1508 will PWN the W7

I just picked up a pair of 1008a's what would they need sealed? How much power? Box size?

 

[GAM3OVR 5,000+ posts]

in the right box people feed them 1000rms daily.
I have a plan for a build with 3 of them and 4000rms on tap for daily

GL

I wouldn't feed that 1508 more then 600 in a daily sence.

No point.

 

[got-one-eight 10+ year member]

I know the W7 has 19mm xmax.. does the 1508 have 25mm? This is what I got from DD when I talked to them. Yes I realize xmax isn't everything. Just curious to see an 8 throw that much. My 8W7 looked like it was ready to jump out of the box already.

 

[GAM3OVR 5,000+ posts]

I know the W7 has 19mm xmax.. does the 1508 have 25mm? This is what I got from DD when I talked to them. Yes I realize xmax isn't everything. Just curious to see an 8 throw that much. My 8W7 looked like it was ready to jump out of the box already.

I like the 8W7

9hz tones looks like a elephant anus getting ready to drop 50 lbs

 

[got-one-eight 10+ year member]

I like the 8W7
9hz tones looks like a elephant anus getting ready to drop 50 lbs

ahh hell thats sig worthy right there!

 

[snfsh79077 10+ year member]

GL
I wouldn't feed that 1508 more then 600 in a daily sence.

No point.

Has been proven to be beneficial before.

 

[Brian_smith06 10+ year member]

why are db's so important to people? a good sq set up never hurt anybody.

 

[GAM3OVR 5,000+ posts]

ahh hell thats sig worthy right there!

//content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

Go for it

Has been proven to be beneficial before.

to each his own

 

[GAM3OVR 5,000+ posts]

why are db's so important to people? a good sq set up never hurt anybody.

THIS

 

[here to buy 10+ year member]

I like the 8W7
9hz tones looks like a elephant anus getting ready to drop 50 lbs

rectal prolapse //content.invisioncic.com/y282845/emoticons/fyi.gif.9f1f679348da7204ce960cfc74bca8e0.gif