DD 9915z's dropped in and Compared to DD9515g's

[rc10mike 10+ year member]

I get my FP's tomorrow...

 

[twistedchild420 5,000+ posts]

Beautiful subs....post HD pics here!

 

[audioholic 5,000+ posts]

better come close to a 160 for the price tag.. and sound good doing it

You expect SQ at 160? That will never happen for many reasons having nothing to do with the speaker being used.

 

[ahole-ic]

You expect SQ at 160? That will never happen for many reasons having nothing to do with the speaker being used.

He just wanted to take a little jab at me. He wasn't using logic.

 

[IMOVeCHICKENS! 10+ year member]

run the amp at .5!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

edit or just break em in at 2ohm then wire to .5ohm itll take around a month or so

 

[ahole-ic]

run the amp at .5!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
edit or just break em in at 2ohm then wire to .5ohm itll take around a month or so

I'm going to be building a new box soon for them with an interchangeable port. These are going in a 4 door 2000 s-10 (the bigger one) blazer. I have heard all over that port on the drivers side will give an extra 2 db. When I built the box I have now, I built the port on the back of the box but all they way to the driver's side because I thought that's what they meant. I've been told that is NOT what they meant. Can anyone shed some light on this subject?

 

[twistedchild420 5,000+ posts]

I'm going to be building a new box soon for them with an interchangeable port. These are going in a 4 door 2000 s-10 (the bigger one) blazer. I have heard all over that port on the drivers side will give an extra 2 db. When I built the box I have now, I built the port on the back of the box but all they way to the driver's side because I thought that's what they meant. I've been told that is NOT what they meant. Can anyone shed some light on this subject?

Port on drivers side is usually in reference to a wall

 

[spltuscon 10+ year member]

I haven't done enough testing on that truck to say if it would be 2db difference, but aiming the port to the driver side with subs facing up does seem to be the most effective layout for s-10 blazers.

 

[wone 10+ year member]

u sir are lucky!