Dampening Material ..

[StealthKill 10+ year member]

I'm also wondering on the amount.

 

[DjiNN 10+ year member]

Well ... i went to a parking lot this afternoon and tried to see if i heard any rattling etc.. and i heard a lot coming from my trunk .. soo .. i think i might just second skin my trunk and maybe put some overkill in there too .. since i dont want the tin foil look .. but on the other hand .. it would act as a great reflector when you get a flat tire .. in the night .. of course

 

[onefalsemove 10+ year member]

I bought 100sqft of promat and its working hella good.

 

[davidtemple 10+ year member]

I've used 36 sq ft in my small SUV rear doors and hatch door, then sprayed several coats of SS spectrum on top of it... the first 36sq ft was Dynamat X ( got it for $110 for bulk pak), Got some Raamat coming this week and I noticed it's thinner but I can always double or triple it, since I like 3 layers or so on outer door and atleast 2 on the inside door, but be careful that you don't over do the inside door or you can not get the door panel back on...

The SS spectrum worked wonders on the doors, each must weigh like 5 lbs or so more than a factory door.

See ya!

 

[xluben 10+ year member]

get a roll of raammat:

http://www.raamaudio.com/cgi-bin/index.cgi?p=pr

plenty to do the trunk and probably a layer on the doors as well.

 

[siliconinja 10+ year member]

get a roll of raamat, and some of the closed cell foam... the aerosol spray adhesive they have works better than most other products so order it at the same time.... while ur waiting for it to get to ur door make sure you go out and get urself a good heavy-weight roller to apply it

 

[DjiNN 10+ year member]

heavy weight roller? how would i be able to lift a heavy roller and roll my trunk ..

 

[StealthKill 10+ year member]

Layers? Would I need to put a few or would one be enough?

Just don't want to put it on and make no difference.

 

[zachzchw 5,000+ posts]

Layers? Would I need to put a few or would one be enough?
Just don't want to put it on and make no difference.

Raamat has a very good tutorial on their site.

Id do at least two layers.

 

[Anthony Collova 10+ year member]

How much you buy dependson what you buy.

If you go with Dynamat extreme, you could use 2 bulk packs (72 sq feet) and be good.

Rammat, you may want to go with 100 - 120 sq feet.

Edead 160-180 sq feet

peel and seal 160-180 sq feet.

Somthing like that.

ANT