-
2Participant count
-
Participant list
-
Caddy
mylows10 5,000+ posts
B2,singer,ampere rep
not hard to make a cut sheet ,actually go to the re box calculator put your box measurements and it will give you cut specs
Activity
No one is currently typing a reply...
Similar threads
You are clipping at the HU, and as stated.. will eventually damage the HU if continued. sounds like you need a little more power as stated. A 2 ch...
- Started by Devin Burch
- Wiring, Electrical & Installation
If you buy a replacement OEM Radio Harness the colors will match up then you can use a wiring harness to connect to that. According to a few...
- Started by Mike Hunt
- Wiring, Electrical & Installation
Do you know what the box/port tuning is?
And what is the db/octave slop on the crossovers being used? Setting the amp crossovers as open as...
- Started by surreal89
- Subwoofers
If I was in your situation, I would experiment with the wring for a day or two. If that didn't work, I would purchase an external amplifier. Run...
- Started by Expertnewb
- Head Units
Yeah well im a maintenance technician working 12 hr days 6 days a wk ontop of school 3 times a wk which are 4 hrs long .so ya an hr drive is hard...
- Started by Bass so loud it HZ
- Enclosure Design & Construction
About this thread
New threads
-
WANTED Down4Sound MM1004 GrayWould like a gray D4S MM1004 to match my other gray MM1004...
- Started by kenvicta
- Replies: 0
-
What's this worth?Going to go on a different direction when I get my new...- Started by chillin
- Replies: 2
-
-
Multi speakersHello all, need some wiring advise for some speakers. I have...- Started by 07FLSTC
- Replies: 2
-
Yamaha Ypa-700!Scored this on ebay. Listed as untested. They accepted my...- Started by metalheadjoe
- Replies: 1