crossfire bmf1000d question.

[hdave 10+ year member]

hey, i just bought a crossfire bmf1000d and will receive it within a few weeks and have a few questions

120A fusing is reccomended...

is there any 120A AGU fuses? or will i need to get a ANL fuse/fuse holder?

Click to read more...

 

[iceteebone 5,000+ posts]

hey, i just bought a crossfire bmf1000d and will receive it within a few weeks and have a few questions
120A fusing is reccomended...

is there any 120A AGU fuses? or will i need to get a ANL fuse/fuse holder?

you'll need an anl. you could try an 80 amp agu first if you already have the fuse holder installed. what size power wire do you have?

 

[hdave 10+ year member]

running 4awg power wire.

and going to be powering 2 CVR 15s sealed

 

[iceteebone 5,000+ posts]

try an 80 amp fuse. you fuse according to power wire and not amp so imo you should be fine with an 80 amp agu.

 

[btnhfan 5,000+ posts]

I say if you are going to not use anl, use maxi.

Easier to deal with.

 

[hdave 10+ year member]

whats maxi?

im confused with all this stuff.. sorry but im a noob.

i basically jsut want to protect my car/amp as cheaply as possible.

 

[iceteebone 5,000+ posts]

you know the fuses in the fuse panel in your car? it's like those except bigger. if you already have the agu fuse holder, just use an 80 amp and see what happens. it doesn't hurt to under fuse.

 

[hdave 10+ year member]

okay thanks.

i will do that. if it doesnt work im going to a cheapass electronics store and buying the cheapest method of 120A fusing.