component amp

high pass. since i saw in your sig it's 5.25 i'll say 100 hz. might be able to get away with 80 hz. just start slowing turning it down from 100 untill you hear distortion and then bring it back up a little

 
900 posts and this is a question? with no very important information none the less. ported or sealed subs? looking at your profile, you are gonna have a difficult time with the 70-90hz range with thsoe speakers, your subs especially if ported will most likely have a ***** of a tiem playing 90 very accurately as well.

 
whats it have to do with my subs? i just asked for a good xover point and the lo pass, hi pass settings.

what he is trying to say is that those comps will struggle playing below 90 hz. and your subs will struggle playing above 70 hz. so you will have a 20 hz. gap in your music. most people who run 6.5's set the frequency at 80 hz. on the comps high pass, and 80 hz. low pass on the sub.

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

About this thread

jtomsic

5,000+ posts
CarAudio.com Veteran
Thread starter
jtomsic
Joined
Location
Washington, Pennsylvania, United States
Start date
Participants
Who Replied
Replies
16
Views
897
Last reply date
Last reply from
jtomsic
561786595_18427607485102160_7010259965928918509_n.jpg

just call me KeV

    Oct 9, 2025
  • 0
  • 0
561583216_18427455586102160_8141545757991593433_n.jpg

just call me KeV

    Oct 9, 2025
  • 0
  • 0

New threads

Top