Competition - eD A - BLAH

[GSteg 10+ year member]

too bad the magnums aren't $200 anymore. those would have been nice to toy around with.

 

[jlaine 10+ year member]

just tell em john sent you and ben will call up john and tell him to come over to Ed to help with the "glue". nah hope all is well and dustin blew his e12a cone off with a modded D2 so come on 2kw to it or more however much that thing puts out @1ohm.
adam

Problem is - with the 12", once you hit the back of that stroke - that's IT. Parts strike and there is no give.

There IS no more to inch out of the suspension, as it's not the suspension that's the problem... The 15A has a lot more leeway, and doesn't have rearward clearance issues like the 12 does in those situations.

Using the 12A in anything other than a completely controlled SPL installation is *******.

 

[mgaidica 10+ year member]

Problem is - with the 12", once you hit the back of that stroke - that's IT. Parts strike and there is no give.
There IS no more to inch out of the suspension, as it's not the suspension that's the problem... The 15A has a lot more leeway, and doesn't have rearward clearance issues like the 12 does in those situations.

Using the 12A in anything other than a completely controlled SPL installation is *******.

Basically what Ben just got done explaining to me. He said I can send it in, they can see what they can do for me, and that they are new and flaws are still being worked out. Said that with my box and 1200 watts, thats probaly what made it go, and that 2400 watts isnt safe really at all.. But remember I blew it at 1200, bt he still said in my setup that was to much. Awsome customer service over there, like always.

Not sure what I'm going to do with it, but we'll see, I'm for sure not competing with the other one, thats up for sale. I still gotta decide what I want next //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif. Most likly a potent 10" or 12".. Then next year, a couple d3's and 2 Treo's.. //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

 

[bumpin_blazer 5,000+ posts]

Basically what Ben just got done explaining to me. He said I can send it in, they can see what they can do for me, and that they are new and flaws are still being worked out. Said that with my box and 1200 watts, thats probaly what made it go, and that 2400 watts isnt safe really at all.. But remember I blew it at 1200, bt he still said in my setup that was to much. Awsome customer service over there, like always.
Not sure what I'm going to do with it, but we'll see, I'm for sure not competing with the other one, thats up for sale. I still gotta decide what I want next //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif. Most likly a potent 10" or 12".. Then next year, a couple d3's and 2 Treo's.. //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

just get you a ground zero nuke 12".

adam

 

[WeDgE 10+ year member]

My 15A is doing fine with 1500WRMS in 1.3 and 1.6 sealed. //content.invisioncic.com/y282845/emoticons/confused.gif.e820e0216602db4765798ac39d28caa9.gif

 

[BDIDDY 10+ year member]

My 15A is doing fine with 1500WRMS in 1.3 and 1.6 sealed. //content.invisioncic.com/y282845/emoticons/confused.gif.e820e0216602db4765798ac39d28caa9.gif

SEALED....

 

[bumpin_blazer 5,000+ posts]

SEALED....

my 12a is doing fine 1.6 ported with 1150 rms.

adam

 

[WeDgE 10+ year member]

SEALED....

Your point being...?

 

[mgaidica 10+ year member]

Your point being...?

A big ported box will blow a sub easier than a small sealed box.

http://adireaudio.com/mobile_audio/drivers/brahma_power_handling.htm

that might put it into perspective..