Clarion SRG920C

ap0091
10+ year member

Senior VIP Member
I went to frys today and saw some of these speakers for 25$ or something, and they sounded preety good from what i heard for small speakers

I was wondering, i have the stock speaker wiring left in the door, could i use that wire (which goes to my headunit i guess) to power some of these 3.5" speakers? I have an amp for my door speakers so they have their own wire

Would i need bassblockers or anything because my Pioneer headunit only sends out 15w or something

 
Okay, i got aftermarket speakers and an amp for them. so when i took out the stock speakers i left the stock wiring, and put my own speaker wire in there going straight to the amp.

I want to buy these 3.5" speakers and run them on the stock wiring without it sounding bad, possible?

 
More then likely it will not sound good off HU power and some cheap $35 speakers. Judging from the numerous threads you've been posting do a little more research before doing this yourself or go to a local shop and they'll help ya sort all this out.

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

About this thread

ap0091

10+ year member
Senior VIP Member
Thread starter
ap0091
Joined
Location
East Texas
Start date
Participants
Who Replied
Replies
4
Views
760
Last reply date
Last reply from
ap0091
IMG_20260515_202650612_HDR.jpg

sherbanater

    May 15, 2026
  • 0
  • 0
IMG_20260515_202732887_HDR.jpg

sherbanater

    May 15, 2026
  • 0
  • 0

New threads

Top