check this out

[dman4486 5,000+ posts]

.26x1728= 449.28inches^3

...

 

[tapout383 10+ year member]

mkkk i updated everything if i made the box 19'' tall could i do it woofer and port back because the OD is 18.5000

http://www.subwoofertools.com/calculator_display.ashx?size_id=17&driver_qts=0.023&driver_vas=5.75982&driver_fs=31.1&driver_xmax=28&driver_displacement=449.280&driver_count=1&enclosure_width=36&enclosure_height=19&vb=6&fb=33&sheet_size=0

and excuse me for be a dumbass but what is your picture showing me?

 

[Buck 5,000+ posts]

...

is that not right?

 

[dman4486 5,000+ posts]

the enclosure's response curve.

similar to what subwoofertools gave you.

 

[tapout383 10+ year member]

yes it is..

 

[dman4486 5,000+ posts]

is that not right?

was going to type it, but u beat me to it

 

[tapout383 10+ year member]

will the 32hz still give me a good meter number at 6 cubes sub up port back? or should i try something diffrent?

 

[tapout383 10+ year member]

bump

 

[tapout383 10+ year member]

bump

would 34hz be good on a meter

 

[tapout383 10+ year member]

bump

would 34hz be good on a meter

 

[tapout383 10+ year member]

bump for meter qestion

 

[tapout383 10+ year member]

or should i tune 38hz

 

[tapout383 10+ year member]

35w x16h x28 dept its going to be double baffled on the top sub up port back

also thinking about using two 6" x 17" unit aeros

 

[HlorridiXplorer 10+ year member]

sub up, port back is good and you could tune the box to 34 or 38 hertz. your not going to know which one is louder until you put it in the car and meter it cause your car might change your note. most of the time for me it's not even an audible difference tho if it's just 4 hertz.

 

[tapout383 10+ year member]

sub up, port back is good and you could tune the box to 34 or 38 hertz. your not going to know which one is louder until you put it in the car and meter it cause your car might change your note. most of the time for me it's not even an audible difference tho if it's just 4 hertz.

so what kind of cubes could i get out of the dems i just set??? thanks for the help you seem to be the only one willing to help considering i need design by morning