Check my enclosure specs

[negativezeroz 5,000+ posts]

This is my first attempt at designing a ported enclosure by myself so please correct me on anything if I'm wrong. Thanks. (sorry for bad paint skills lol) All material is 3/4" MDF

Click to read more...

 

[negativezeroz 5,000+ posts]

bump

 

[negativezeroz 5,000+ posts]

someone?

 

[gHOstFaCe 10+ year member]

Looks like 1.57ft^3 internal, but I get 51.47" for the port length if you wanna tune it to 27hz. Is this for a 10" or 8" sub?

Personally, I would tune it to 32hz. That way you would only need 33.5" of port length and it would bump your internal volume up to 1.64ft^3.

 

[negativezeroz 5,000+ posts]

Looks like 1.57ft^3 internal, but I get 51.47" for the port length if you wanna tune it to 27hz. Is this for a 10" or 8" sub?
Personally, I would tune it to 32hz. That way you would only need 33.5" of port length and it would bump your internal volume up to 1.64ft^3.

single SE10...I am gonna tune to 27.

 

[tRiGgEr 5,000+ posts]

Internal 19.25 x 19.25 x 12 = 1.65ft^3 tuned to 27.2hz after displacement.

This is not factoring driver displacement.

After sub displacement 1.51ft^3 tuned to 28.5hz. Looks good to me.

//content.invisioncic.com/y282845/emoticons/thumbsup.gif.3287b36ca96645a13a43aff531f37f02.gif

 

[negativezeroz 5,000+ posts]

Internal 19.25 x 19.25 x 12 = 1.65ft^3 tuned to 27.2hz after displacement.
This is not factoring driver displacement.

After sub displacement 1.51ft^3 tuned to 28.5hz. Looks good to me.

//content.invisioncic.com/y282845/emoticons/thumbsup.gif.3287b36ca96645a13a43aff531f37f02.gif

so its 1.51cf tuned to 28.5Hz with the .14cf displacement of the SE10? Sounds good to me. I can live with that.//content.invisioncic.com/y282845/emoticons/yumyum.gif.0556df42231b304b9c995aefd13928a8.gif

 

[tRiGgEr 5,000+ posts]

so its 1.51cf tuned to 28.5Hz with the .14cf displacement of the SE10? Sounds good to me. I can live with that.//content.invisioncic.com/y282845/emoticons/yumyum.gif.0556df42231b304b9c995aefd13928a8.gif

I would be happy with that also Enjoy.

 

[nissanrider06 10+ year member]

those bends arnt gonna provide to good of airflow...

 

[tRiGgEr 5,000+ posts]

those bends arnt gonna provide to good of airflow...

No but they will work fine for a daily driver. I doubt he plans on any SPL runs @ 28hz...

 

[JimJ 5,000+ posts]

My e12a.22 box is built exactly like that.

I have no problems with air flow //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[PhatTonyDeMarco 5,000+ posts]

those bends arnt gonna provide to good of airflow...

//content.invisioncic.com/y282845/emoticons/laugh.gif.48439b2acf2cfca21620f01e7f77d1e4.gif

The design is fine.

 

[negativezeroz 5,000+ posts]

Well I shall start building Monday(working tonight through Sunday) so I will have pics as I am working on it.