cdt or phoenix gold?

[99dango 10+ year member]

cdt or phoenix gold components??

budget is around $150

which will yeild better results with a sundown 100.4

any other suggestions also welcome

Click to read more...

 

[RipDaJacka]

PG will be cheaper.. I have the octane R's and they arent bad for $60 comps.. and I hear really good stuff on the PG RSD's

 

[innsanes 10+ year member]

CDT EF with that price, or go with a for a used alpine type X

 

[99dango 10+ year member]

you would suggest them over the cl-61??

 

[DejaWiz 5,000+ posts]

RSd's. With 100w rms per channel or more, the midbass should get quite lively.

 

[tbasile1 10+ year member]

RSd's. With 100w rms per channel or more, the midbass should get quite lively.

x1000000000000

on the RSDs

They can found for $90 on ebay

 

[tcguy85 10+ year member]

i want a set of rsd's so bad.

 

[99dango 10+ year member]

how much power can they take when set accordingly? that 100rms wouldnt be to much per side??

 

[tcguy85 10+ year member]

how much power can they take when set accordingly? that 100rms wouldnt be to much per side??

people are giving them over 100 watts rms to each side with no problems. as long as it's clean power you'll be fine.

 

[rmdl51 10+ year member]

I'm getting mines in the coming days (PG RSD's) and I'm willing to give them 150w rms per side with a ZX 650.4, I'll let you know after I install what do I think, I'm chosing that amount of power due all the recommendations from everybody around here, I hope I don't blow them since I still don't have much experience about this, hehe. anyways I'm not blaming anybody if I blow them it's my choice and I believe (by common sense) if they are as good as everybody describes those PG they should hold up pretty good. I'll keep you updated.

 

[tcguy85 10+ year member]

please do, i will be picking up a set in the near future as well and would like another review.

 

[Jacobman 10+ year member]

I give mine 150rms and they handle it fine.

 

[99dango 10+ year member]

nice nice sounds like the cdt idea just got booted out the window

im going to go for the rsds

 

[99dango 10+ year member]

how would 6.5" components front and back sound in a durango?? bad idea?? i have the power (100rms x 4) and i was wondering if anyones heard components front and back...

 

[tcguy85 10+ year member]

it'll be fine but i'm a fan of not running rear fill. that is as long as your have a powerful front stage. in an suv rear fill might not be a bad idea but in my small car i'm gonnna try and run just fronts.