Cascade Designs Omega 12's

[ssackett 10+ year member]

What is the DC Resistance, though ?

Dang I didn't check each coil before i installed them. //content.invisioncic.com/y282845/emoticons/crap.gif.7f4dd41e3e9b23fbd170a1ee6f65cecc.gif With them wired in series they read about 2.2ohms

 

[ssackett 10+ year member]

Nice how does 42hz? i was thinkin doin my box 40hz but dont know how it would sound daily

I sounds good. I just lost some of the lows i am usually use to. But i have no complaints so far.

 

[sundownz Pro Seller]

Dang I didn't check each coil before i installed them. //content.invisioncic.com/y282845/emoticons/crap.gif.7f4dd41e3e9b23fbd170a1ee6f65cecc.gif With them wired in series they read about 2.2ohms

I'd double check that... if they are 2.2 in series on a DMM that seems more like a D1 to me.

 

[ssackett 10+ year member]

**** that looks sweet. Thanks for another vid man, ill take them all day

No prob. I am sure you would be pleased with an Omega. They love these 3000d's! Its a very nice combination. //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

 

[thorshammer1 10+ year member]

I'd double check that... if they are 2.2 in series on a DMM that seems more like a D1 to me.

x2

 

[ssackett 10+ year member]

I'd double check that... if they are 2.2 in series on a DMM that seems more like a D1 to me.

I have 1 coil on each sub wired from the neg to the pos. Then the reminding coils i have wired parallel

 

[NewAgeKing 5,000+ posts]

No prob. I am sure you would be pleased with an Omega. They love these 3000d's! Its a very nice combination. //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

How come you have a higher tune though? I was going to run mine at like 32.

 

[sundownz Pro Seller]

So... that is the final load to the strapped pair of amps ?

Makes a bit more sense.

Then each sub is 4.4 in series, or 2.2 per coil - sounds about right with a coil of that size.

Should be able to burp the amps with all coils in parallel with a DCR like that... just roll into it for safety on the subs and the amp //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[ssackett 10+ year member]

How come you have a higher tune though? I was going to run mine at like 32.

Just looking to try something a little different than past setups and also i am chasing numbers right now and not to worried about a daily setup although everything sounds great having it tuned at 42hz. Im going to raise it a little more to see what happens as well as drop it down alot lower. Gotta love aero ports.

 

[NewAgeKing 5,000+ posts]

Just looking to try something a little different than past setups and also i am chasing high numbers. I going to raise it a little more to see what happens as well as drop it down alot lower. Gotta love aero ports.

Alright. Ill be checkin it out because i wont get mine for another week or so. I may change my mind about the box i have now.

 

[ssackett 10+ year member]

So... that is the final load to the strapped pair of amps ?
Makes a bit more sense.

Then each sub is 4.4 in series, or 2.2 per coil - sounds about right with a coil of that size.

Should be able to burp the amps with all coils in parallel with a DCR like that... just roll into it for safety on the subs and the amp //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

Yes that is my final load I have strapped on the amps. Ill add my other batcap this week and try burping them lower. Should be interesting.

 

[sundownz Pro Seller]

On my single custom Nightshade I gained about 1 dB going from 1 ohm per amp to 1/4 per amp. Thats just one sub, though - so power compression is an issue. Spread out across two it may even get you that 150.

 

[ssackett 10+ year member]

On my single custom Nightshade I gained about 1 dB going from 1 ohm per amp to 1/4 per amp. Thats just one sub, though - so power compression is an issue. Spread out across two it may even get you that 150.

Ill definitely give it a shot and see what happens. First i have to get rid of my temp box i am using. It's a piece!

 

[jeres313 10+ year member]

Ill definitely give it a shot and see what happens. First i have to get rid of my temp box i am using. It's a piece!

aint that the truth haha...

 

[ssackett 10+ year member]

^^ funny guy!