Can't Fix Speaker Polarity!!!!!

[PurpleDiesel 10+ year member]

UPDATE:

Problem fixed! after all this time I had no clue it was backwards to begin with lol

 

How I resolved the issue:

Left the headunit rca as they were

* reversed the headunit > bit one inputs

* left everything else the same

* Reset all features on the bit one and ran the initial setup all over again.

When playing some test tracks I noticed... Polarity of speakers is backwards as right sounds comes from left speakers and vice versa

Headunit -> Bit one -> amps

My Headunit Balance is Reversed because no matter what combination I tried I always got one source that was incorrect so I left it alone.

Head unit balance = backwards

bit one software L+R = correct

bit one controller balance = correct

sound output = backwards

Audio playback:

Right voice comes from LEFT speakers

Left voice comes from RIGHT speakers

Audison bit one software:

Right controls right speakers

Left controls left speakers

At the headunit:

Right fades Left

Left Fades Right

On the Bit one controller:

Right fades right

Left fades left

How in the world do I fix this.... I think it's messing with my imaging also

Click to read more...

 

[RicksI30 10+ year member]

You have rca's to the bit one and then another set to the amps correct? Your signal is switching sides somewhere. What kind of wire connects the controller?

 

[fasfocus00 5,000+ posts]

FYI this is not polarity, this is balance.

 

[PurpleDiesel 10+ year member]

FYI this is not polarity, this is balance.

Correct TY

You have rca's to the bit one and then another set to the amps correct? Your signal is switching sides somewhere. What kind of wire connects the controller?

I remember now.

My Headunit Balance is Reversed because no matter what combination I tried I always got one source that was incorrect.

Head unit balance = backwards

bit one software L+R = correct

bit one controller balance = correct

sound output = backwards

 

[trumpet 5,000+ posts]

Recheck all of your wiring, starting at the head unit.

 

[PurpleDiesel 10+ year member]

Recheck all of your wiring, starting at the head unit.

I figured it out my headunit is backwards in order to have the correct balance on the bit one.

If i fix the balance at the headunit everything else that follows is backwards

 

[trumpet 5,000+ posts]

I figured it out my headunit is backwards in order to have the correct balance on the bit one.If i fix the balance at the headunit everything else that follows is backwards

That's messed up. What's the head unit?

 

[PurpleDiesel 10+ year member]

That's messed up. What's the head unit?

Problem fixed! after all this time I had no clue it was backwards to begin with lol

How I resolved the issue:

Left the headunit rca as they were

* reversed the headunit > bit one inputs

* left everything else the same

* Reset all features on the bit one and ran the initial setup all over again.

After doing all this the software corrected everything...

Thanks for the input guys