PurpleDiesel 10+ year member
Member
UPDATE:
Problem fixed! after all this time I had no clue it was backwards to begin with lol
How I resolved the issue:
Left the headunit rca as they were
* reversed the headunit > bit one inputs
* left everything else the same
* Reset all features on the bit one and ran the initial setup all over again.
When playing some test tracks I noticed... Polarity of speakers is backwards as right sounds comes from left speakers and vice versa
Headunit -> Bit one -> amps
My Headunit Balance is Reversed because no matter what combination I tried I always got one source that was incorrect so I left it alone.
Head unit balance = backwards
bit one software L+R = correct
bit one controller balance = correct
sound output = backwards
Audio playback:
Right voice comes from LEFT speakers
Left voice comes from RIGHT speakers
Audison bit one software:
Right controls right speakers
Left controls left speakers
At the headunit:
Right fades Left
Left Fades Right
On the Bit one controller:
Right fades right
Left fades left
How in the world do I fix this.... I think it's messing with my imaging also
Problem fixed! after all this time I had no clue it was backwards to begin with lol
How I resolved the issue:
Left the headunit rca as they were
* reversed the headunit > bit one inputs
* left everything else the same
* Reset all features on the bit one and ran the initial setup all over again.
When playing some test tracks I noticed... Polarity of speakers is backwards as right sounds comes from left speakers and vice versa
Headunit -> Bit one -> amps
My Headunit Balance is Reversed because no matter what combination I tried I always got one source that was incorrect so I left it alone.
Head unit balance = backwards
bit one software L+R = correct
bit one controller balance = correct
sound output = backwards
Audio playback:
Right voice comes from LEFT speakers
Left voice comes from RIGHT speakers
Audison bit one software:
Right controls right speakers
Left controls left speakers
At the headunit:
Right fades Left
Left Fades Right
On the Bit one controller:
Right fades right
Left fades left
How in the world do I fix this.... I think it's messing with my imaging also
Last edited by a moderator: