Looks like everyone wants this stuff broken down instead of as one so here goes everything works just fine
HERES MY FEEDBACK & REFERENCES
http://forum.sounddomain.com/ubbthreads....true#Post976404
1 Hifonics brutus 1500D - SOLD SOLD
1 Valor amp VPA404(2months old) - 85$
I used this for my components..i had never heard of them before but i gave it a shot and i was impressed for the price
features are as follows
* 1000 Watt MAX 4-Channel Amplifier
* 4 x 100 Watts RMS @ 4 Ohm
* 4 x 150 Watts RMS @ 2 Ohm
* 2 x 500 Watts MAX @ 4 Ohm
* Frequency Response: 20Hz - 40KHz
* Dimensions (L x D x H) 10.25" x 10 1/8" x 2 1/8"
* Class A/B Mosfet Circuitry
* 3-Way Circuit Protection
* Power and Protection Mode LED Light
* Adjustable Gain Control
* Built In Low Pass & High Pass Filter Crossovers
* Low and High Level Inputs
* Signal to Noise Ratio: 102dB
* Bridgeable
http://img140.imageshack.us/i/amps.jpg/
CDT components CL SERIES - 150$
the twitters are new never used cos i had some PG twits from my previous set already installed and didnt wanna cut a new whole in my doors
BOTH speakers have an identical rip on the cone from the door but they work flawlessly
Also comes with the crossovers in MINT condition
Alpine CDA 9813 with remote - 120$
http://img140.imageshack.us/i/cdtcomps.jpg/
ORIGINAL Kove Armageddon Z15D - 120$
This is sub is a beast...it weighs like 50 - 60 lbs...this is the orginal one whem Kove was the shyt
Power handling: 1050 watts RMS
VCdia: 3"
Le: 2.8 mH
Nominal impedance: 4 ohms per coil
Re: 3.0 ohms per coil
Frequency response: 20-250 Hz.
Magnet weight: 192 oz.
Fs: 37 Hz
SPL: 90 dB 2.83V/1m
Vas: 2.63 cu. ft.
Qes: 0.53
Qts: 0.48
Xmax: 20mm
Dimensions: Overall Diameter: 15-1/2", Cutout Diameter: 13-7/8", Mounting Depth: 7-1/2", Magnet Diameter: 7-3/4", Magnet Height: 3"
HERES MY FEEDBACK & REFERENCES
http://forum.sounddomain.com/ubbthreads....true#Post976404
1 Hifonics brutus 1500D - SOLD SOLD
1 Valor amp VPA404(2months old) - 85$
I used this for my components..i had never heard of them before but i gave it a shot and i was impressed for the price
features are as follows
* 1000 Watt MAX 4-Channel Amplifier
* 4 x 100 Watts RMS @ 4 Ohm
* 4 x 150 Watts RMS @ 2 Ohm
* 2 x 500 Watts MAX @ 4 Ohm
* Frequency Response: 20Hz - 40KHz
* Dimensions (L x D x H) 10.25" x 10 1/8" x 2 1/8"
* Class A/B Mosfet Circuitry
* 3-Way Circuit Protection
* Power and Protection Mode LED Light
* Adjustable Gain Control
* Built In Low Pass & High Pass Filter Crossovers
* Low and High Level Inputs
* Signal to Noise Ratio: 102dB
* Bridgeable
http://img140.imageshack.us/i/amps.jpg/
CDT components CL SERIES - 150$
the twitters are new never used cos i had some PG twits from my previous set already installed and didnt wanna cut a new whole in my doors
BOTH speakers have an identical rip on the cone from the door but they work flawlessly
Also comes with the crossovers in MINT condition
Alpine CDA 9813 with remote - 120$
http://img140.imageshack.us/i/cdtcomps.jpg/
ORIGINAL Kove Armageddon Z15D - 120$
This is sub is a beast...it weighs like 50 - 60 lbs...this is the orginal one whem Kove was the shyt
Power handling: 1050 watts RMS
VCdia: 3"
Le: 2.8 mH
Nominal impedance: 4 ohms per coil
Re: 3.0 ohms per coil
Frequency response: 20-250 Hz.
Magnet weight: 192 oz.
Fs: 37 Hz
SPL: 90 dB 2.83V/1m
Vas: 2.63 cu. ft.
Qes: 0.53
Qts: 0.48
Xmax: 20mm
Dimensions: Overall Diameter: 15-1/2", Cutout Diameter: 13-7/8", Mounting Depth: 7-1/2", Magnet Diameter: 7-3/4", Magnet Height: 3"
