Bumpin's Summer 2011 Build

[Bumpin' Goalie 10+ year member]

Bahahaha that's my radio!

Next time you're at 12 Gauge, I'll swing by with it. I should be there tomorrow afternoon, actually. Probably Wednesday, too, to be realistic.

 

[Buck 5,000+ posts]

I can be there too. We'll just have a party.

 

[Bumpin' Goalie 10+ year member]

I can be there too. We'll just have a party.

I hope it isn't raining, because their bay will be in use. That Lincoln from the night we ran your wiring; it's having a blow through done. Craziness.

 

[Buck 5,000+ posts]

I heard it today, it's tuned low. The inside speakers **** ding dong but it's gonna be loud when they break in. If you want to make the drive out here, we can use our garage.

 

[Bumpin' Goalie 10+ year member]

I heard it today, it's tuned low. The inside speakers **** ding dong but it's gonna be loud when they break in. If you want to make the drive out here, we can use our garage.

I haven't heard it yet. Impressive sub stage results?

I'll need to swing by 12 Gauge for a few small things anyhow. Connectors and the like. But if it's raining I may sacrifice the gas to get there. Pred's game at night though. So it depends on timing. I want UPS to show up early, but it's usually around 4. And leaving for the game at 6. Thus Wednesday ha.

 

[Buck 5,000+ posts]

Just let me know. What do you need? I have some AP 4 gauge terminals and a bunch of random little wire connectors.

 

[Bumpin' Goalie 10+ year member]

Just let me know. What do you need? I have some AP 4 gauge terminals and a bunch of random little wire connectors.

Speaker wire, forked connectors, serrated washers and ring terminals, and I'm sure a few other things that are slipping my mind.

 

[Buck 5,000+ posts]

Alright, well just lmk when you're gonna head up there.

 

[Bumpin' Goalie 10+ year member]

Alright, well just lmk when you're gonna head up there.

Will do, sir.

 

[Bumpin' Goalie 10+ year member]

Some progress. Most hardware is in. XO3 is going in next. This is a "rough draft" if you will. Still undecided on my false floor cover method. Might move the amp to a different spot. We'll see.

After the XO3 goes in I'll clean up the wiring, construct some form of false floor covering. Also shopping around for some different tweets, possibly some mids. Running CK6 right now, and just always looking to try new equipment.

 

[Bettr n' Revrse 5,000+ posts]

I realy like that Xplod man! If you need wire I have 400 feet on its way?

 

[Bumpin' Goalie 10+ year member]

I realy like that Xplod man! If you need wire I have 400 feet on its way?

Thanks. It's a monster. A member here had his 4 channel version inspected and was estimated to produce well over rated power on top of everything else. Nice guts in these. Plus they offer a direct mode that bypasses the internal X-overs and increases the "esque". (lulz)

I have plenty of wire. Need to trim it down to proper length once I get the amp in a more permanent position. I have slack as of now to allow adjusting.

 

[Bettr n' Revrse 5,000+ posts]

Thanks. It's a monster. A member here had his 4 channel version inspected and was estimated to produce well over rated power on top of everything else. Nice guts in these. Plus they offer a direct mode that bypasses the internal X-overs and increases the "esque". (lulz)
I have plenty of wire. Need to trim it down to proper length once I get the amp in a more permanent position.. I have slack as of now to allow adjusting.

Just checkin lol

 

[Bumpin' Goalie 10+ year member]

Just checkin lol

Thank ya. //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[Bumpin' Goalie 10+ year member]

XO3 is in. Working on a cover now.