Bump on a budget??? (this should be good)

[Badfastbusa 10+ year member]

Ok, i figured that i would start a thread for folks that don't have a lot of money to spend or just want an idea of what to look for that would hit hard and not drain the bank...

what would be the hardest hitting system you could put together for around $500... the average person seems to usually want to to spend around $500-$600 and wants the hardest hit they can get... what would be the amp(s) and sub(s) paired with what box(s) would be the biggest bang for the buck.

I am building a system for my 2000 chevy 1500 silverado extended cab 4dr, and i want it to hit as hard as i can for the bucks that i spend, i would like to stay $600 and under for the amp and subs and i would probably be building the box myself to save some costs, what would you recommend? i would like to keep the box below the bottom of my rear window, and i don't care about having the rear seat anymore, i just want a hard hitting system.

Click to read more...

 

[spudracer326 10+ year member]

TYPE ARRRRGGGGG of course......

 

[Fast1one 10+ year member]

TYPE ARRRRGGGGG of course......

Yup......

My entire system (Front stage, two amps, and the four assassin 8s) Cost around 650...and yes it hits ok. A lot can be had if you buy used //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

 

[Badfastbusa 10+ year member]

This is the amp that i already have to work with:

Kenwood 1000W Class D Bridgeable Mono Amplifier with Low-Pass Crossover

Model: KAC-9102D

Continuous Watts per Channel (4 Ohms) 1000 x 1

Continuous Watts per Channel (2 Ohms) 850 x 1

Continuous Watts Bridged 500 x 1

Max Power Watts per Channel (4 Ohms) 1000 x 1

Max Power Watts per Channel (2 Ohms) 1,700

Max Power Watts per Channel (4 Ohms Bridged) 1000 x 1

Number of Channels 1

Crossover Low-pass

Amplifier Class and Type Class D

Low-Pass Filter Variable (50-200Hz)

Line-Level Input Yes

Speaker-Level Input Yes

Crossover Frequency Range 50-200Hz

Bass Boost Yes

Signal-to-Noise Ratio 96dB

 

[Badfastbusa 10+ year member]

ttt, any insight? basically all i need is subs and an enclosure to have a complete system.

 

[CBFryman2 5,000+ posts]

my bump cost $600 total //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[dkguitarist 5,000+ posts]

rl-p's and maybe an orion1200d