Bracing question

[big junior 10+ year member]

Here is a very basic sketch made with the computer. This is the box design for the jl 10w7 ported. It's not made to scale but I wanted to get an idea if and where I should brace it. It will be 1.5ft^3, dimensions are approximatly W 23.5, H 13.5, D 15.5 (off the top of my head). I'll double the baffle up untill the port to make it 1.5" thick. Any help

box.zip

Click to read more...

 

[cxixer 10+ year member]

Cute picture. Make sure you double up the baffle as you said. You May want to glue and screw braces against the port wall, port extension, and wall across from the port. I did this with my old W7 box and there was a measured improvement in spl.

 

[big junior 10+ year member]

Thanks, I worked on that picture for like two hours. lol. But for real though, thanks for for the fedback.